A methodology for optimisation of solar dish-Stirling systems size, based on the local frequency distribution of direct normal irradiance

In geographical areas where direct solar irradiation levels are relatively high, concentrated solar energy systems are one of the most promising green energy technologies. Dish-Stirling systems are those that achieve the highest levels of solar-to-electric conversion efficiency, and yet they are still among the least common commercially available technologies. This paper focuses on a strategy aimed at promoting greater diffusion of dish-Stirling systems, which involves optimizing the size of the collector aperture area based on the hourly frequency distributions of beam irradiance and defining a new incentive scheme with a feed-in tariff that is variable with the installed costs of the technology. To this purpose, a new numerical model was defined and calibrated on the experimental data collected for an existing dish-Stirling plant located in Palermo (Italy). Hourly-based simulations were carried out to assess the energy performance of 6 different system configurations located on 7 sites in the central Mediterranean area using two different solar databases: Meteonorm and PVGIS. A new simplified calculation approach was also developed to simulate the dish-Stirling energy production from the hourly frequency histograms of the beam irradiance. The results reveal that an optimised dish-Stirling system can produce 70–87 MWhe/year in locations with direct irradiation varying between 2000 and 2500 kWh/(m2·year). The proposed incentive scheme would guarantee a payback time for investment in this technology of about ten years and the effect of economies of scale could lead, over the years, to a levelized cost of energy similar to that of other concentrating power systems