Add to ORKGIn this work the dependence of corrosion resistance of Al alloys AA 2024-T3 on sealing treatments was studied. AA 2024-T3 samples were anodized at 14 V in a bath containing sulfuric and tartaric acids. Anodized samples were sealed with four different treatments: hot water, vapour, hot water with salts and stirred hot water. Electrochemical Impedance Spectroscopy measurements were performed to estimate samples' corrosion resistance in a solution simulating sea water environment. Samples sealed in hot water showed the highest corrosion resistance
Electrochemical impedance spectroscopy (EIS) has been used to characterize the surfaces of anodized ...
The formation behaviors of the anodic oxide film that forms on various commercially available alumin...
WOS: 000286328600018In this study, aluminum was anodized in 0.4 M H(2)SO(4) + 0.145 M H(3)BO(3) solu...
In this work the dependence of corrosion resistance of Al alloys AA 2024-T3 on sealing treatments wa...
In the aeronautical industry, Al-Cu alloys are used as a structural material in the manufacturing of...
Boric‐sulfuric acid anodized (BSAA) aluminum alloys have been sealed in hot solutions of cerium or y...
Corrosion is a major problem for high strength aluminium alloys. Thickening of the naturally formed ...
Aluminum is widely used due to its excellent properties, lightweight and thermal conductivity. Howev...
Aluminum alloys AA 2024-T3 is many widely applied in the aircraft industry because it has good mecha...
AA 1100 aluminium alloy has been anidized in sulphamic acid electrolyte and sealed in triethanolamin...
The aim of this work was to evaluate the corrosion behavior of the AA2055 Aluminum-lithium alloy ano...
In this study, we aim to enhance physical and chemical properties of 7075 aluminum via anodizing. Fo...
2024 T3 is one of aluminium alloys which are widely used in the aircraft structures. Anodizing of al...
This master’s thesis is focused on anodic oxidation of an aluminium surface with subsequent sealing ...
The utilization of metal materials finds widespread applications in various industries, including th...
Electrochemical impedance spectroscopy (EIS) has been used to characterize the surfaces of anodized ...
The formation behaviors of the anodic oxide film that forms on various commercially available alumin...
WOS: 000286328600018In this study, aluminum was anodized in 0.4 M H(2)SO(4) + 0.145 M H(3)BO(3) solu...
In this work the dependence of corrosion resistance of Al alloys AA 2024-T3 on sealing treatments wa...
In the aeronautical industry, Al-Cu alloys are used as a structural material in the manufacturing of...
Boric‐sulfuric acid anodized (BSAA) aluminum alloys have been sealed in hot solutions of cerium or y...
Corrosion is a major problem for high strength aluminium alloys. Thickening of the naturally formed ...
Aluminum is widely used due to its excellent properties, lightweight and thermal conductivity. Howev...
Aluminum alloys AA 2024-T3 is many widely applied in the aircraft industry because it has good mecha...
AA 1100 aluminium alloy has been anidized in sulphamic acid electrolyte and sealed in triethanolamin...
The aim of this work was to evaluate the corrosion behavior of the AA2055 Aluminum-lithium alloy ano...
In this study, we aim to enhance physical and chemical properties of 7075 aluminum via anodizing. Fo...
2024 T3 is one of aluminium alloys which are widely used in the aircraft structures. Anodizing of al...
This master’s thesis is focused on anodic oxidation of an aluminium surface with subsequent sealing ...
The utilization of metal materials finds widespread applications in various industries, including th...
Electrochemical impedance spectroscopy (EIS) has been used to characterize the surfaces of anodized ...
The formation behaviors of the anodic oxide film that forms on various commercially available alumin...
WOS: 000286328600018In this study, aluminum was anodized in 0.4 M H(2)SO(4) + 0.145 M H(3)BO(3) solu...