Add to ORKGA method is proposed for boron determination in steels at ppm levels by inductively-coupled plasma spectrometry. Solutions equivalent to 5 g sample in 100 ml were used, a previous separation of iron being performed, in HCl, with ethylic ether. The analytical line used for boron analysis was 2496. 78 A and the results were verified with standard samples.Peer reviewe
The medium carbon (0.5 wt% C) steels containing various boron contents were studied to observe the d...
Práce se zabývá stanovením boru metodou ICP-OES. Byly nalezeny vhodné optické a pracovní parametry a...
Translated from German (Radex-rundschau 1982 v. 1/2 p. 780-788)SIGLEAvailable from British Library D...
Translated from Spanish (Rev. Metal; Madrid 1985 v. 21(2) p. 87-90)Available from British Library Do...
An extended study of different sampling introduction approaches using inductively coupled plasma mas...
The sample is treated with 5N H2SO4 followed by concentrated HNO3 and the diluted mixture is filtere...
A simple analytical method for the determination of boron in steeels using a computational technique...
A method for the determination of Boron in steels by FI-ICP-MS is described. It is shown that flow i...
Trabajo presentado en Sixth Internacional Conference on Progress of Analytical Chemistry, celebrado ...
An experimental study for the determination of boron in steels by inductively coupled plasma atomic ...
The microamount of boron in iron and steel was determined rapidly by a solvent extraction method. Th...
A spectrographic method employing rotating electrode and high voltage A.C. intermittent arc for the ...
A thesis submitted in partial fulfilment of the requirements of the Council for National Academic Aw...
Boron is often used as a trace additive in steel in order to control the phase transformation behavi...
Spent nuclear fuel from a VVER-440-type power plant is stored in Slovakia in the Interim Spent Fuel...
The medium carbon (0.5 wt% C) steels containing various boron contents were studied to observe the d...
Práce se zabývá stanovením boru metodou ICP-OES. Byly nalezeny vhodné optické a pracovní parametry a...
Translated from German (Radex-rundschau 1982 v. 1/2 p. 780-788)SIGLEAvailable from British Library D...
Translated from Spanish (Rev. Metal; Madrid 1985 v. 21(2) p. 87-90)Available from British Library Do...
An extended study of different sampling introduction approaches using inductively coupled plasma mas...
The sample is treated with 5N H2SO4 followed by concentrated HNO3 and the diluted mixture is filtere...
A simple analytical method for the determination of boron in steeels using a computational technique...
A method for the determination of Boron in steels by FI-ICP-MS is described. It is shown that flow i...
Trabajo presentado en Sixth Internacional Conference on Progress of Analytical Chemistry, celebrado ...
An experimental study for the determination of boron in steels by inductively coupled plasma atomic ...
The microamount of boron in iron and steel was determined rapidly by a solvent extraction method. Th...
A spectrographic method employing rotating electrode and high voltage A.C. intermittent arc for the ...
A thesis submitted in partial fulfilment of the requirements of the Council for National Academic Aw...
Boron is often used as a trace additive in steel in order to control the phase transformation behavi...
Spent nuclear fuel from a VVER-440-type power plant is stored in Slovakia in the Interim Spent Fuel...
The medium carbon (0.5 wt% C) steels containing various boron contents were studied to observe the d...
Práce se zabývá stanovením boru metodou ICP-OES. Byly nalezeny vhodné optické a pracovní parametry a...
Translated from German (Radex-rundschau 1982 v. 1/2 p. 780-788)SIGLEAvailable from British Library D...