5 pags., 7 figs., 3 tabs.An X-ray photoelectron study of sulfonated polyethylene films, with different sulfonation degrees (SD) before and after pyrrole polymerization at their surfaces is presented. For SD values of about 2g/m2 the outer surface of polyethylene film becomes fully sulfonated. Sulfonic groups which act as a counterion of the grown polypyrrole (PPy) monitor partially the fixation of PPy at the outer surface. A variation of the pyrrole rings/counterion ratio (7.4-3.9) depending on SD values has been found. © 1991 American Chemical Society.Financial support of this work was from CICYT under project MAT88-0159. We thank Mr. E. Pardo for collection of XP spectra. C.A. acknowledges to Ministry of Education and Science, Spain, f...
For many years, electrochemically deposited polypyrrole has found application in a host of technolog...
The analysis of polymer surfaces in terms of functional groups can be undertaken by X-ray photoelect...
The treatment of polymers with fuming sulfuric acid is a well-known procedure for introducing \ue5f8...
Soluble polypyrrole has been synthesized by In-situ chemical oxidative polymerization method in aque...
10.1116/1.1399319Journal of Vacuum Science and Technology, Part A: Vacuum, Surfaces and Films1952680...
An x-ray photoelectron spectroscopy (XPS) analysis was performed of polypyrroles (PPy) electrosynthe...
Poly(p-phenylene) (PPP), polypyrrole (PPY), and poly(p-phenylene-pyrrole) (PPP-PPY) films were elect...
Voltammetry and FTIR–ATR techniques have been employed to investigate polyphenol films formed on pla...
In this research, the polymerization of pyrrole in various sulfonated thermoplastic and diblock matr...
In this paper the synthesis of polypyrrole (PPY) films by a novel photo-induced processing and the c...
Electrochemically grown films of polyaniline, polypyrrole, polythiophene, and poly(ethylenedioxythio...
This paper describes the results of spectroelectrochemical studies performed using thin films compos...
The non-uniformity of oxidation across polypropylene and polyethylene films has been measured by a c...
The surface morphology of sodium p-toluenesulfonate-doped polypyrrole films generated by electropoly...
Electrodeposited polypyrrole films prepared with paratoluenesulfonate (pTS), dodecylsulfate (DDS) an...
For many years, electrochemically deposited polypyrrole has found application in a host of technolog...
The analysis of polymer surfaces in terms of functional groups can be undertaken by X-ray photoelect...
The treatment of polymers with fuming sulfuric acid is a well-known procedure for introducing \ue5f8...
Soluble polypyrrole has been synthesized by In-situ chemical oxidative polymerization method in aque...
10.1116/1.1399319Journal of Vacuum Science and Technology, Part A: Vacuum, Surfaces and Films1952680...
An x-ray photoelectron spectroscopy (XPS) analysis was performed of polypyrroles (PPy) electrosynthe...
Poly(p-phenylene) (PPP), polypyrrole (PPY), and poly(p-phenylene-pyrrole) (PPP-PPY) films were elect...
Voltammetry and FTIR–ATR techniques have been employed to investigate polyphenol films formed on pla...
In this research, the polymerization of pyrrole in various sulfonated thermoplastic and diblock matr...
In this paper the synthesis of polypyrrole (PPY) films by a novel photo-induced processing and the c...
Electrochemically grown films of polyaniline, polypyrrole, polythiophene, and poly(ethylenedioxythio...
This paper describes the results of spectroelectrochemical studies performed using thin films compos...
The non-uniformity of oxidation across polypropylene and polyethylene films has been measured by a c...
The surface morphology of sodium p-toluenesulfonate-doped polypyrrole films generated by electropoly...
Electrodeposited polypyrrole films prepared with paratoluenesulfonate (pTS), dodecylsulfate (DDS) an...
For many years, electrochemically deposited polypyrrole has found application in a host of technolog...
The analysis of polymer surfaces in terms of functional groups can be undertaken by X-ray photoelect...
The treatment of polymers with fuming sulfuric acid is a well-known procedure for introducing \ue5f8...