Strength Analysis of Deployable Hangar

It is of interest to investigate extended usability of Saab’s Deployable Aircraft Maintenance facility(DAM) with respect to Eurocode standards. One of the features of the deployable hangar is that it shouldcomply with the structural strength standards for permanent buildings which requires compliance withEurocodes.Eurocodes are European standards which deals with the development of building and structural design.Compliance with Eurocodes works as a proof of requirement for mechanical strength, stability andsafety of structures. The Eurocodes were created by the European Committee for Standardization withthe intent to simplify technical obstacles and enable trade within Europe and elsewhere.The thesis has resulted in the creation of a Finite Element Model (FE-Model) of the deployable hangar,for which different loading combinations have been applied. From the FE-results, trade-off curves havebeen generated that show the effect that the different loading conditions have on the differentcomponents of the hangar. This is done for the current configuration of the hangar and for differentproduct variants. The analysis includes the effects of increased load levels.From the trade-off curves it is possible to see to what extent the hangar can withstand increased load.This is being measured with a Eurocode ratio. It has been found that the Eurocode ratio is directlydependent on increase of loads i.e. increased loads give a linear increase in Eurocode ratio for most ofthe components studied. The product variants consists of different lengths of the hangar. From the studyit has been found that adding or removing sections does not have a substantial effect on the strength ofthe hangar and the Eurocode ratio mostly remains constant. In addition the most critical componentshave been found and design suggestions have been proposed to improve the strength of the hangarwithin compliance with Eurocodes.