Improving the Energy Performance of Traction Electric Drive Vehicles in Solving Electric Braking

The effectiveness of the electric braking system largely depends on how the braking is carried out, whether the braking characteristics that it forms are acceptable for a given vehicle, how simple and reliable the technical solutions embedded in the system are, and where the braking energy is used. With electric braking, it is possible not only to extinguish the electrical energy on the braking resistor, but also to send it back to the storage device and again use it in traction mode. This paper analyzes the most common methods of electric braking used in electric braking systems for traction electric drives that are in operation on vehicles. As the main criterion for evaluating the method of electric braking, its energy indicators are selected. The results of scientific research of the proposed new method of electric braking, which provides better energy performance and new technical solutions for its implementation, are considered. When implementing this method, DC motors are operated by sequential excitation generators. The current in the field windings is regulated by a DC-DC-converter. Energy in the power circuit is accumulated in storage devices and used in traction mode. When the storage devices are filled, the energy in the power circuit is extinguished by the braking resistor, and the energy from the output of the DC-DC-converter is used for own needs. In this case, braking characteristics are formed as in generators of independent excitation. To increase the braking efficiency at low speeds, it is necessary to smoothly regulate the resistance of the braking resistors by shunting them with transistor switches