The possibility of using clay from Bochkarikhinskoe deposit (Sverdlovskaya oblast, Russia) in the ceramic building production has been considered. The chemical, mineral and granulometric composition of clay was determined. The basic technological properties of clay were studied: plasticity, sensitivity to drying, sintering. The frost resistance and mechanical properties of ceramic brick samples were determined. The clay studied with introduction of organic additives also may be used in ceramic production. © Published under licence by IOP Publishing Ltd
Low-melting polymineral clays are widely used in building ceramics production. The properties of cer...
In this research clay deposits located in the Nachchaduwa area were investigated to identify suitabl...
Introduction. This article discusses the possibility of expanding the colour palette of a ceramic sh...
The properties of red low-melting clay with the aim of its use in the production of building ceramic...
The object of the study is the physical and chemical processes of formation of the structure and pro...
The object of research is the physical and chemical processes of forming the structure and propertie...
The objects of study were the Mali Budyshcha and Opishnia clays of two deposits in the Poltava regio...
In this paper, we study the chemical and mineralogical composition of the Krasnoyarsk Kray clay used...
© 2016, International Journal of Pharmacy and Technology. All rights reserved.At present day a high ...
This study aimed to identify the composition of ceramic mass for the manufacture of bricks with impr...
The urgency of the issue is associated with the lack of a methodology for studying and identifying r...
Mineral constituents, particle size and chemistry of ceramic raw materials may control the way ce-ra...
The article presents the results of scientific and experimental studies on the creation of ceramic r...
In this work, the composition and technologies for producing composite ceramics based on clay and po...
Facade articles of ceramics being produced recently in Lithuania are hygroscopic and are not resista...
Low-melting polymineral clays are widely used in building ceramics production. The properties of cer...
In this research clay deposits located in the Nachchaduwa area were investigated to identify suitabl...
Introduction. This article discusses the possibility of expanding the colour palette of a ceramic sh...
The properties of red low-melting clay with the aim of its use in the production of building ceramic...
The object of the study is the physical and chemical processes of formation of the structure and pro...
The object of research is the physical and chemical processes of forming the structure and propertie...
The objects of study were the Mali Budyshcha and Opishnia clays of two deposits in the Poltava regio...
In this paper, we study the chemical and mineralogical composition of the Krasnoyarsk Kray clay used...
© 2016, International Journal of Pharmacy and Technology. All rights reserved.At present day a high ...
This study aimed to identify the composition of ceramic mass for the manufacture of bricks with impr...
The urgency of the issue is associated with the lack of a methodology for studying and identifying r...
Mineral constituents, particle size and chemistry of ceramic raw materials may control the way ce-ra...
The article presents the results of scientific and experimental studies on the creation of ceramic r...
In this work, the composition and technologies for producing composite ceramics based on clay and po...
Facade articles of ceramics being produced recently in Lithuania are hygroscopic and are not resista...
Low-melting polymineral clays are widely used in building ceramics production. The properties of cer...
In this research clay deposits located in the Nachchaduwa area were investigated to identify suitabl...
Introduction. This article discusses the possibility of expanding the colour palette of a ceramic sh...