Study on the Time-Dependent Mechanical Behavior and Springback of Magnesium Alloy Sheet (AZ31B) in Warm Conditions

In this study, the time-dependent mechanical behavior of the magnesium alloy sheet (AZ31B) was investigated through the creep and stress relaxation tests with respect to the temperature and pre-strain. The microstructure changes during creep and stress relaxation were investigated. As the tensile deformation increased in the material, twinning and dynamic recrystallization occurred, especially after the plastic instability. As a result, AZ31B showed lower resistance to creep and stress relaxation due to dynamic recrystallization. Additionally, time-dependent springback characteristics in the V- and L-bending processes concerning the holding time and different forming conditions were investigated. We analyzed changes of microstructure at each forming temperature and process. The uniaxial tensile creep test was conducted to compare the microstructures in various pre-strain conditions with those at the secondary creep stage. For the bending process, the change of the microstructure after the forming was compared to that with punch holding maintained for 1000 s after forming. Due to recrystallization, with the holding time in the die set of 60 s, the springback angle decreased by nearly 70%. Increased holding time in the die set resulted in a reduced springback angle