Purpose: To determine excipient and ibuprofen:excipient mixture sensitivity to reprocessing produced by either direct compression or wet granulation.Methods: The effect of excipient type, technology and reprocessing on flow, compressibility and compactibility was assessed using and 8x2x2 factorial design. Design Expert® v.8.01 software was employed for data analysis. Pure excipients were processed by direct compression, while the ibuprofen:excipient mixtures were processed by wet granulation. Once compacts were produced, they were milled and reprocessed using the same technologies, respectively. Excipient properties such as particle size, porosity and densities were also evaluated.Results: For most excipients, reprocessing caused a 20 – 50 ...
The study presented was conducted to determine whether a percolation threshold value, previously det...
AbstractParticle rearrangements, compaction under pressure and in vitro dissolution have been evalua...
The objective of this thesis was to investigate a mechanical dry powder coating approach to improve ...
In this paper, ibuprofen from a commercial source and its fractioned samples with narrower size dist...
Tablets at present, remain the most preferred oral dosage form because of many advantages they offer...
Objective: This work evaluated the influence of the technological properties of polyvinylpyrrolidone...
The impact of variations in the wet granulation step during the manufacturing process on the in-vitr...
Diluents are essential components of a tablet formulation. The type of diluent used in a formulation...
Various excipients are used in the pharmaceutical tablet industries to present desirable properties ...
Objective:The objective of this work was to enhance dissolution and tableting property of a poor sol...
The article describes the application of a twin-screw granulation process to enhance the dissolution...
Direct compression, as the simplest and therefore preferable method of tableting, is often hindered...
A study of the comparative effects of different formulating additives and film coating on the proper...
The low melting point, poor flow, physico-mechanical properties (particle size distribution, shape, ...
Excipients are widely used to formulate solid drug forms by direct compression. However, the powder...
The study presented was conducted to determine whether a percolation threshold value, previously det...
AbstractParticle rearrangements, compaction under pressure and in vitro dissolution have been evalua...
The objective of this thesis was to investigate a mechanical dry powder coating approach to improve ...
In this paper, ibuprofen from a commercial source and its fractioned samples with narrower size dist...
Tablets at present, remain the most preferred oral dosage form because of many advantages they offer...
Objective: This work evaluated the influence of the technological properties of polyvinylpyrrolidone...
The impact of variations in the wet granulation step during the manufacturing process on the in-vitr...
Diluents are essential components of a tablet formulation. The type of diluent used in a formulation...
Various excipients are used in the pharmaceutical tablet industries to present desirable properties ...
Objective:The objective of this work was to enhance dissolution and tableting property of a poor sol...
The article describes the application of a twin-screw granulation process to enhance the dissolution...
Direct compression, as the simplest and therefore preferable method of tableting, is often hindered...
A study of the comparative effects of different formulating additives and film coating on the proper...
The low melting point, poor flow, physico-mechanical properties (particle size distribution, shape, ...
Excipients are widely used to formulate solid drug forms by direct compression. However, the powder...
The study presented was conducted to determine whether a percolation threshold value, previously det...
AbstractParticle rearrangements, compaction under pressure and in vitro dissolution have been evalua...
The objective of this thesis was to investigate a mechanical dry powder coating approach to improve ...