An ECG- and PPG-Based Wearable Atrial Fibrillation Detection Device: Signal Acquisition

When symptoms of atrial fibrillation (AF), a common cardiac arrhythmia, are experienced, a Holter monitor or event recorder is used for official diagnosis. Apart from the fact that these devices are experienced as inconvenient, AF can already manifest damage in a pre-symptomatic phase. This thesis is aimed at developing a method for recording heart activity using a wearable device to permit convenient early detection of AF. For this, heart activity is measured continuously by means of photoplethysmography (PPG). A classification algorithm is used to detect AF episodes in the PPG recording. If the algorithm suspects AF, a limb lead I ECG recording is requested from the user. The ECG recording can be analyzed by a clinician for official diagnosis. The Maxim Integrated Max86150 chip is used for the implementation of PPG and ECG. Acceleration data is gathered by means of the Adafruit MMA8451 accelerometer to allow for detection of motion artefacts. These sensors and the data they retrieve are controlled and processed by the ARM Cortex-M7 microcontroller. From the results, PPG recordings have a higher quality when infrared light is used as compared to when red light is used. However, both types of recordings are of sufficient quality for monitoring the heart rate accurately when in stasis. Although complete functionality of the system could not be verified, the results are promising for future work