Sensing Properties of NiO Loaded SnO₂ Nanoparticles—Specific Selectivity to H₂S

NiO-loaded SnO2 powders were prepared involving two chemical procedures. The mesoporous SnO2 support was synthesized by a hydrothermal route using Brij 35 non-ionic surfactant as a template. The nickel loadings of 1 and 10 wt.%. NiO were deposited by the wet impregnation method. The H2S sensing properties of xNiO-(1-x)SnO2 (x = 0, 1, 10%) thick layers deposited onto commercial substrates have been investigated with respect to different potential interfering gases (NO2, CO, CO2, CH4, NH3 and SO2) over a wide range of operating temperatures and relative humidity specific for in-field conditions. Following the correlation of the sensing results with the morphological ones, 1wt.% NiO/SnO2 was selected for simultaneous electrical resistance and work function investigations. The purpose was to depict the sensing mechanism by splitting between specific changes over the electron affinity induced by the surface coverage with hydroxyl dipoles and over the band bending induced by the variable surface charge under H2S exposure. Thus, it was found that different gas-interaction partners are dependent upon the amount of H2S, mirrored through the threshold value of 5 ppm H2S, which from an applicative point of view, represents the lower limit of health effects, an eight-hour TWA