Smokeless powder additives are usually detected by their extraction from post-blast residues or unburned powder particles followed by analysis using chromatographic techniques. This work presents the first comprehensive study of the detection of the volatile and semi-volatile additives of smokeless powders using solid phase microextraction (SPME) as a sampling and pre-concentration technique. Seventy smokeless powders were studied using laboratory based chromatography techniques and a field deployable ion mobility spectrometer (IMS). The detection of diphenylamine, ethyl and methyl centralite, 2,4-dinitrotoluene, diethyl and dibutyl phthalate by IMS to associate the presence of these compounds to smokeless powders is also reported for the f...
© 2019, © 2019 Australian Academy of Forensic Sciences. The detection and quantification of compound...
The growing need for fast sampling of explosives in high throughput areas has increased the demand f...
Solid phase microextraction (SPME) is a popular sampling technique whereby analytes are sorbed to a ...
Smokeless powder additives are usually detected by their extraction from post-blast residues or unbu...
Smokeless powder additives are usually detected by their extraction from post-blast residues or unbu...
Smokeless powder additives are usually detected by their extraction from post-blast residues or unbu...
Smokeless powder additives are usually detected by their extraction from post-blast residues or unbu...
The goal of this project was to develop a rapid separation and detection method for analyzing organi...
The goal of this project was to develop a rapid separation and detection method for analyzing organi...
Analysis of smokeless powders is of interest from forensics and security perspectives. This article ...
Smokeless powders (SPs) are one of the most commonly used propellants for ammunition but can also be...
Smokeless powders are a set of energetic materials, known as low explosives, which are typically uti...
Improvised explosive devices (IEDs) are charged devices often used by terrorists and criminals to cr...
Cigarettes may contain up to 10% by weight additives which are intended to make them more attractive...
Cigarettes may contain up to 10% by weight additives which are intended to make them more attractive...
© 2019, © 2019 Australian Academy of Forensic Sciences. The detection and quantification of compound...
The growing need for fast sampling of explosives in high throughput areas has increased the demand f...
Solid phase microextraction (SPME) is a popular sampling technique whereby analytes are sorbed to a ...
Smokeless powder additives are usually detected by their extraction from post-blast residues or unbu...
Smokeless powder additives are usually detected by their extraction from post-blast residues or unbu...
Smokeless powder additives are usually detected by their extraction from post-blast residues or unbu...
Smokeless powder additives are usually detected by their extraction from post-blast residues or unbu...
The goal of this project was to develop a rapid separation and detection method for analyzing organi...
The goal of this project was to develop a rapid separation and detection method for analyzing organi...
Analysis of smokeless powders is of interest from forensics and security perspectives. This article ...
Smokeless powders (SPs) are one of the most commonly used propellants for ammunition but can also be...
Smokeless powders are a set of energetic materials, known as low explosives, which are typically uti...
Improvised explosive devices (IEDs) are charged devices often used by terrorists and criminals to cr...
Cigarettes may contain up to 10% by weight additives which are intended to make them more attractive...
Cigarettes may contain up to 10% by weight additives which are intended to make them more attractive...
© 2019, © 2019 Australian Academy of Forensic Sciences. The detection and quantification of compound...
The growing need for fast sampling of explosives in high throughput areas has increased the demand f...
Solid phase microextraction (SPME) is a popular sampling technique whereby analytes are sorbed to a ...