International audienceThe ILC ECAL front-end chip will integrate many functions of the readout electronics including a DAC dedicated to calibration. We present two versions of DAC with respectively 12 and 14 bits, designed in a CMOS 0.35μm process. Both are based on segmented arrays of switched capacitors controlled by a Dynamic Element Matching (DEM) algorithm. A full differential architecture is used, and the amplifiers can be turned into a standby mode reducing the power dissipation. The 12 bit DAC features an INL lower than 0.3 LSB at 5MHz, and dissipates less than 7mW. The 14 bit DAC is an improved version of the 12 bit design
This paper presents a 14 bit 200 MS/s current-steering DAC with a novel digital calibration techniqu...
The necessity of full integrated electronics readout for the next ILC ECAL presents many challenges ...
This chapter presents the implementation and measurement results of two DAC test-chip implementation...
International audienceThe ILC ECAL front-end chip will integrate many functions of the readout elect...
CD Rom; ISBN 978424457748International audienceThe ILC ECAL front-end chip will integrate many funct...
The integration of digital and analog systems on single CMOS integrated circuits will continue to be...
This paper presents a 14-bit digital-to-analog converter (DAC) with pipelined dynamic element matchi...
Graduation date: 2012In this thesis work, a design of 14-bit, 20MS/s segmented digital-to-analog con...
ISBN 978142443962International audienceA low power 12 bits analog to digital converter is a critical...
Abstract—Large-area current source arrays are widely used in current-steering digital-to-analog conv...
This paper presents a 14 bit 200 MS/s current-steering DAC with a novel digital calibration techniqu...
Dynamic element matching (DEM) is widely-used in multi-bit DACs to prevent mismatches among nominall...
Digital to analog converter (DAC) acts like a path between DSP chips and power amplifiers used for t...
This paper describes a calibration-free/dynamic-element-matching-free 8-bit 2.4-GS/s single-core cur...
Digital to Analog Converter (DAC) function is to convert a given string of digital input into an ana...
This paper presents a 14 bit 200 MS/s current-steering DAC with a novel digital calibration techniqu...
The necessity of full integrated electronics readout for the next ILC ECAL presents many challenges ...
This chapter presents the implementation and measurement results of two DAC test-chip implementation...
International audienceThe ILC ECAL front-end chip will integrate many functions of the readout elect...
CD Rom; ISBN 978424457748International audienceThe ILC ECAL front-end chip will integrate many funct...
The integration of digital and analog systems on single CMOS integrated circuits will continue to be...
This paper presents a 14-bit digital-to-analog converter (DAC) with pipelined dynamic element matchi...
Graduation date: 2012In this thesis work, a design of 14-bit, 20MS/s segmented digital-to-analog con...
ISBN 978142443962International audienceA low power 12 bits analog to digital converter is a critical...
Abstract—Large-area current source arrays are widely used in current-steering digital-to-analog conv...
This paper presents a 14 bit 200 MS/s current-steering DAC with a novel digital calibration techniqu...
Dynamic element matching (DEM) is widely-used in multi-bit DACs to prevent mismatches among nominall...
Digital to analog converter (DAC) acts like a path between DSP chips and power amplifiers used for t...
This paper describes a calibration-free/dynamic-element-matching-free 8-bit 2.4-GS/s single-core cur...
Digital to Analog Converter (DAC) function is to convert a given string of digital input into an ana...
This paper presents a 14 bit 200 MS/s current-steering DAC with a novel digital calibration techniqu...
The necessity of full integrated electronics readout for the next ILC ECAL presents many challenges ...
This chapter presents the implementation and measurement results of two DAC test-chip implementation...
Add to ORKG