3 mol% Yttria doped zirconia ceramics were consolidated by spark plasma sintering (SPS) at two sintering temperatures with the aim of achieving two different reduction levels. Microstructural characterization of the ceramics was performed by scanning electron microscopy (SEM). Electrical properties were investigated by means of impedance spectroscopy from room temperature up to 500 °C. The two ceramics presented a remarkably different electrical behavior. The effect of the extra electrons introduced by reduction during SPS on both the bulk and the grain boundary conductivity was analyzed and discussed.Peer reviewe
The ionic conductivity of flash-sintered, polycrystalline 8 mol% yttria stabilized zirconia (8YSZ) w...
Doped zirconia has been used in electronic applications in the cubic crystalline phase. Ceria-stabil...
The re-oxidation kinetics of BaTiO3 ceramics sintered by Spark Plasma Sintering (SPS) was investigat...
The defect chemistry-modulated dielectric properties of dense yttria-doped zirconia ceramics prepare...
International audienceThe effect of grain size on the electrical properties of Sr-doped La 2 Zr 2 O ...
Starting from a sinter reactive powder prepared by a gel precipitation technique, dense, ultra-fine ...
The sintering behaviour of a number of commercially produced 8 mol% yttria-stabilized zirconia powde...
ZrO2: 3 mol% Y2O3 (3YSZ) polycrystalline pellets were sintered at 1400 °C and by applying an alterna...
International audienceThis study reports on the electrical characterization of nano-sized zirconia p...
International audienceYttria stabilized zirconia (3 mol% YSZ) ceramics were prepared by Flash-SPS, w...
Nanocrystalline 3 mol% yttria-doped tetragonal zirconia polycrystal (3Y-TZP) has been successfully s...
Gas-phase synthesised zirconia powders with yttria additions provide an attractive alternative to co...
The influence of the addition of ferric oxide to 3Y-TZP on the conductivity and microstructure of si...
Spark-plasma-sintering (SPS) has been applied to BaYiO(3) to prepare dense ceramics consisting of su...
Zirconia ceramics stabilized with 3 mol % Yttria were produced by spark-plasma sintering. Toughness,...
The ionic conductivity of flash-sintered, polycrystalline 8 mol% yttria stabilized zirconia (8YSZ) w...
Doped zirconia has been used in electronic applications in the cubic crystalline phase. Ceria-stabil...
The re-oxidation kinetics of BaTiO3 ceramics sintered by Spark Plasma Sintering (SPS) was investigat...
The defect chemistry-modulated dielectric properties of dense yttria-doped zirconia ceramics prepare...
International audienceThe effect of grain size on the electrical properties of Sr-doped La 2 Zr 2 O ...
Starting from a sinter reactive powder prepared by a gel precipitation technique, dense, ultra-fine ...
The sintering behaviour of a number of commercially produced 8 mol% yttria-stabilized zirconia powde...
ZrO2: 3 mol% Y2O3 (3YSZ) polycrystalline pellets were sintered at 1400 °C and by applying an alterna...
International audienceThis study reports on the electrical characterization of nano-sized zirconia p...
International audienceYttria stabilized zirconia (3 mol% YSZ) ceramics were prepared by Flash-SPS, w...
Nanocrystalline 3 mol% yttria-doped tetragonal zirconia polycrystal (3Y-TZP) has been successfully s...
Gas-phase synthesised zirconia powders with yttria additions provide an attractive alternative to co...
The influence of the addition of ferric oxide to 3Y-TZP on the conductivity and microstructure of si...
Spark-plasma-sintering (SPS) has been applied to BaYiO(3) to prepare dense ceramics consisting of su...
Zirconia ceramics stabilized with 3 mol % Yttria were produced by spark-plasma sintering. Toughness,...
The ionic conductivity of flash-sintered, polycrystalline 8 mol% yttria stabilized zirconia (8YSZ) w...
Doped zirconia has been used in electronic applications in the cubic crystalline phase. Ceria-stabil...
The re-oxidation kinetics of BaTiO3 ceramics sintered by Spark Plasma Sintering (SPS) was investigat...