Objectives: To evaluate the effect of chemical degradation on bond strength of resin-modified glass-ionomer cements bonded to primary and permanent dentin. Methods: Class I cavities of permanent and primary extracted human molars were restored with two resin-modified glass-ionomer cements: Fuji 11 LC and Vitremer, and stored in water for 24 h. Half samples were immersed in 10% NaOCl aqueous solution for 5 h. Teeth were sectioned into beams and tested for microtensile bond strengths. Results were analyzed with multiple ANOVA and Tukey`s tests (p < 0.05). Analysis of debonded surfaces was performed by SEM. Results: 24 h bond strengths for Vitremer and Fuji 11 LC were similar. For Fuji 11, bond strength values were higher for primary than for ...
The resin modified glass ionomer cements(RMGICs) have been used for years since 1989. Recently it ha...
Purpose: The purpose of this study was to measure the shear bond strength (SBS) of glass ionomer cem...
Introduction: According to appropriate characteristics of glass ionomer cementum and constant increa...
Objective: To evaluate the effect of EDTA pre-treatment of dentine on resistance to degradation of t...
Objective: The objective of this study was to investigate the microtensile bond strength (μTBS) of c...
Objectives: The purpose of this study was to measure the microtensile bond strengths of three glass ...
Objectives: To compare the in vitro shear bond strength of two commercially available resin-modified...
Objectives: To examine changes in shear bond strength to dentin (SBS), flexural strength (FS) and di...
Objective: The purpose of this study was to determine the bond stability and the change in interfaci...
Purpose To evaluate the 2-year microtensile bond strength (μTBS) of different glass ionomer cements ...
AIM: The aim of this study was to determine in vitro the shear bond strength (MPa) and the type of b...
The purpose of this study was to determine and compare the shear bond strength of a conventional gl...
Aim of the Study: This study aims to evaluate the effects three different conditioning agents on the...
Purpose: The purpose of this study was to evaluate the shear bond strength (SBS) of various restorat...
Objectives: Limited information exists with regard to the adhesive ability of glass ionomer cements ...
The resin modified glass ionomer cements(RMGICs) have been used for years since 1989. Recently it ha...
Purpose: The purpose of this study was to measure the shear bond strength (SBS) of glass ionomer cem...
Introduction: According to appropriate characteristics of glass ionomer cementum and constant increa...
Objective: To evaluate the effect of EDTA pre-treatment of dentine on resistance to degradation of t...
Objective: The objective of this study was to investigate the microtensile bond strength (μTBS) of c...
Objectives: The purpose of this study was to measure the microtensile bond strengths of three glass ...
Objectives: To compare the in vitro shear bond strength of two commercially available resin-modified...
Objectives: To examine changes in shear bond strength to dentin (SBS), flexural strength (FS) and di...
Objective: The purpose of this study was to determine the bond stability and the change in interfaci...
Purpose To evaluate the 2-year microtensile bond strength (μTBS) of different glass ionomer cements ...
AIM: The aim of this study was to determine in vitro the shear bond strength (MPa) and the type of b...
The purpose of this study was to determine and compare the shear bond strength of a conventional gl...
Aim of the Study: This study aims to evaluate the effects three different conditioning agents on the...
Purpose: The purpose of this study was to evaluate the shear bond strength (SBS) of various restorat...
Objectives: Limited information exists with regard to the adhesive ability of glass ionomer cements ...
The resin modified glass ionomer cements(RMGICs) have been used for years since 1989. Recently it ha...
Purpose: The purpose of this study was to measure the shear bond strength (SBS) of glass ionomer cem...
Introduction: According to appropriate characteristics of glass ionomer cementum and constant increa...