Acquisition, Characterization and Application of a New Selective Surface for Solar Thermal Collectors

O estudo de superfÃcies seletivas para coletores solares tÃrmicos, hà alguns anos, enfoca o uso de pastas e tintas para recobrir chapas de cobre ou alumÃnio, formando a placa absorvedora do coletor. Essas tintas ou pastas sÃo eletrodepositadas em placas metÃlicas, sendo este processo muitas vezes responsÃvel pelo levado custo de superfÃcies seletivas. O uso de compÃsitos obtidos a partir do Ãxido de cromo, Ãxido de ferro e Ãxido de titÃnio em um processo cerÃmico, utilizando a tÃcnica de deposiÃÃo por screen-printing pode ser uma alternativa para a obtenÃÃo de novas superfÃcies seletivas que tenham eficiÃncia prÃxima Ãs tintas e pastas jà comercializadas e com baixo custo de fabricaÃÃo. O objetivo deste trabalho à obter e caracterizar superfÃcies seletivas à base de cromo, ferro e titÃnio e comparÃ-las com outras superfÃcies jà comercializadas (Ãxidos metÃlicos), encontrar os valores da absortividade e caracterizar as mesmas por espectroscopÃa raman e infavermelho.The study of selective coating for thermal solar collectors has been carried out with focus on the use of selective paints and coatings for copper and aluminum plates, which are used to manufacture the absorber plate. The processes, such as electrodeposition, used in these paints and coatings are expensive and they increasing the price of the final product. The use of composite obtained from chromium oxide, iron oxide, and titanium oxide in a ceramic process using the screen-printing deposition technique is an alternative to develop new selective coating with approximately the same thermal efficiency, but at a lower cost than the commercial ones. The results show that the absorptivity values measured with the new coatings are close to those presented by the manufacturers in the commercial sufaces. The objective is to obtain and characterize selective surfaces based on chromium, iron and titanium and compares them to other areas already marketed (metal oxides), find the values of absorptivity and characterize them by raman and infrared spectroscopy