Simulation of routing protocols in ns3 simulation environment

The first part of thesis is about networks that are divided based on area. It includes also basic characteristic of Manet networks. The next chapter is about distribution of routing protocols into preactive, reactive, hybrid. In the simulation, there is comparison of 3 routing protocols, which are described in this chapter. The simulation is performed in program called Ns-3, more specifically in version 3.14. In the third chapter, this network simulator is described more closely. Here is also mentioned its continuity on previous version Ns-2. The goal of this simulation is to create a network with implemented routing protocols and with certain number of nodes, which has configured mobility, so the network looks like Manet network as much as possible. There are also 2 applications created, which were used to determine the delay for each routing protocol. Another part of thesis is about implementation of the quality of service (QoS) and energy model for each routing protocol. Energy model was used to calculate the remaining energy of node. Next activity summarizes how the implementation of QoS changed delay for used applications and how it changed the energy consumption of a node. The result of thesis is that the voice applications was preferred after the QoS implementation. The value of delay increased for ftp application. Percentually, the improvement for voice traffic was 30-31 %. The increase of delay was percentually 7-19 %. The difference in remaining energy after QoS implementation was about 1%. The actual amount of battery in the beginning of simulation was 1 J