Add to ORKGCasting of test castings from low – carbon steel with different deoxidation degrees. Oxygen activity measurement in castings – from the temperatures over liquidus to solidification of metal. Analysis of chemical composition of inclusions. Calculation of thermodynamic equilibrium between oxygen activity and aluminium, silicon and manganese activities in unalloyed steel. Estimation of conditions for the course of carbon reactions in studied casting
The article is focused on the use of the measurement of oxygen activity for the management of cast-i...
20.00; Translated from Czech. (Hutn. Listy 1990 v. 45(1) p. 41-43)Available from British Library Doc...
Most of the published experimental data on the activity of carbon in austenite are for binary Fe-C a...
Oxygen is an element that is first purposely brought into the steel melt to remove some unwanted ele...
Received 16.06.2008; published in revised form 01.10.2008 Purpose: Cast irons are the basic structur...
Most refining reactions in steelmaking involve oxidation of impurity element(s). The product(s) of o...
The thesis deals with determination of the oxygen content in ferro-alloys with emphasis on direct ox...
The contribution summarises the results of application of thermodynamic calculation obtained from ox...
It has been known that oxygen in the melt gives rise to the tendency of forming white cast iron, but...
This work is about development and methodology verification of data collection which will be used in...
In the cast iron melt the oxygen is present not only as dissolved gas but also as oxide ; it is ther...
The purpose is studying the effect of technological parameters of extra-furnace treatment and contin...
The contribution summarises the results of oxygen activity determinations, which were measured and r...
Import 26/06/2013V této diplomové práci je vyhodnocen vliv aktivity kyslíku na metalurgickou kvalitu...
Abstract Oxygen in graphitic cast irons substantially influences crystallization. The paper deals wi...
The article is focused on the use of the measurement of oxygen activity for the management of cast-i...
20.00; Translated from Czech. (Hutn. Listy 1990 v. 45(1) p. 41-43)Available from British Library Doc...
Most of the published experimental data on the activity of carbon in austenite are for binary Fe-C a...
Oxygen is an element that is first purposely brought into the steel melt to remove some unwanted ele...
Received 16.06.2008; published in revised form 01.10.2008 Purpose: Cast irons are the basic structur...
Most refining reactions in steelmaking involve oxidation of impurity element(s). The product(s) of o...
The thesis deals with determination of the oxygen content in ferro-alloys with emphasis on direct ox...
The contribution summarises the results of application of thermodynamic calculation obtained from ox...
It has been known that oxygen in the melt gives rise to the tendency of forming white cast iron, but...
This work is about development and methodology verification of data collection which will be used in...
In the cast iron melt the oxygen is present not only as dissolved gas but also as oxide ; it is ther...
The purpose is studying the effect of technological parameters of extra-furnace treatment and contin...
The contribution summarises the results of oxygen activity determinations, which were measured and r...
Import 26/06/2013V této diplomové práci je vyhodnocen vliv aktivity kyslíku na metalurgickou kvalitu...
Abstract Oxygen in graphitic cast irons substantially influences crystallization. The paper deals wi...
The article is focused on the use of the measurement of oxygen activity for the management of cast-i...
20.00; Translated from Czech. (Hutn. Listy 1990 v. 45(1) p. 41-43)Available from British Library Doc...
Most of the published experimental data on the activity of carbon in austenite are for binary Fe-C a...