This diploma thesis is an experimental study of grease lubrication in a starved elastohydrodynamic lubricated (EHL) contact. Lubricating film thickness is measured with tribological experimental device ball-on-disc using optical interferometry and high speed camera. The experiment is aimed at a comparison of results acquired by ball-on-disc device and full scale axial bearing. In addition, this paper also investigates the influence of number of the rolling elements (overrolling time) on the resulting film thickness
The limiting shear stress coefficient has been studied in a impacting ball apparatus for four differ...
The limiting shear stress coefficient has been studied in a impacting ball apparatus for four differ...
The rheology of soap thickened greases has been investigated in a cone and plate rheometer and a mod...
This master’s thesis deals with the experimental study of an elastohydrodynamic contact under condit...
This paper describes an experimental study of starvation and flow behavior in grease-lubricated elas...
This diploma thesis deals with an analysis of lubrication film in contacts of simulated thrust ball ...
This paper deals with the experimental study of an elastohydrodynamic contact under conditions of in...
The dissertation thesis deals with an experimental study of an elastohydrodynamic contact under insu...
Abstract The objective of this study was to investigate the grease-lubricated film-forming mechanism...
The film thickness of a ball-on-disc contact lubricated with four greases of different formulations ...
The service life of rolling bearings is significantly affected by the film formation in elastohydrod...
The service life of rolling bearings is significantly affected by the film formation in elastohydrod...
Abstract Although most rolling element bearings are grease lubricated, the underlying mechanisms of ...
Oil lubrication of the contacts between high-elastic modulus, non-conformal surfaces is well underst...
The limiting shear stress coefficient has been studied in a impacting ball apparatus for four differ...
The limiting shear stress coefficient has been studied in a impacting ball apparatus for four differ...
The limiting shear stress coefficient has been studied in a impacting ball apparatus for four differ...
The rheology of soap thickened greases has been investigated in a cone and plate rheometer and a mod...
This master’s thesis deals with the experimental study of an elastohydrodynamic contact under condit...
This paper describes an experimental study of starvation and flow behavior in grease-lubricated elas...
This diploma thesis deals with an analysis of lubrication film in contacts of simulated thrust ball ...
This paper deals with the experimental study of an elastohydrodynamic contact under conditions of in...
The dissertation thesis deals with an experimental study of an elastohydrodynamic contact under insu...
Abstract The objective of this study was to investigate the grease-lubricated film-forming mechanism...
The film thickness of a ball-on-disc contact lubricated with four greases of different formulations ...
The service life of rolling bearings is significantly affected by the film formation in elastohydrod...
The service life of rolling bearings is significantly affected by the film formation in elastohydrod...
Abstract Although most rolling element bearings are grease lubricated, the underlying mechanisms of ...
Oil lubrication of the contacts between high-elastic modulus, non-conformal surfaces is well underst...
The limiting shear stress coefficient has been studied in a impacting ball apparatus for four differ...
The limiting shear stress coefficient has been studied in a impacting ball apparatus for four differ...
The limiting shear stress coefficient has been studied in a impacting ball apparatus for four differ...
The rheology of soap thickened greases has been investigated in a cone and plate rheometer and a mod...