Add to ORKGCutting forces problems analyses during milling operation, description of experimental machinery for measuring cutting forces. Characteristic of composite materials, their properties, production and usage. Evaluation of experimentally measured values of cutting forces during cylindrical conventional milling. Technical economic evaluation
The prediction of cutting forces is essential to plan machining operations without unstable vibratio...
[[abstract]]This paper presents the first anisotropic mechanistic model for the force prediction in ...
Analysis of carbon fibre reinforced plastic milling shows that cutting behaviour and the results ach...
The thesis is focused on composite materials with a view to their classifi-cation, identification, u...
Thesis (Master's)--University of Washington, 2017-03There is an ever increasing demand for materials...
Nowadays, weight reducing is become possible with composite materials taking place of steel (60-80\%...
Gypsum fiber composite (GFC) is a kind of building material widely used in interior decoration. Mill...
This paper presents an empirical force model quantifying the effect of fibre volume fraction and fib...
This master´s thesis is focused on fibre–filled composite materials, their distribution, labeling, u...
Composite materials are difficult to machine because of the anisotropy and inhomogeneity of their mi...
This dissertation thesis is focused on the analysis of specific cutting forces and accompanying effe...
AbstractComposite materials are difficult to machine because of the anisotropy and inhomogeneity of ...
AbstractThis paper provides a study on the milling of carbon fiber reinforced laminated composites. ...
AbstractMachining of carbon/carbon (C/C) composite materials is difficult to carry out due to its hi...
Machining technology for composite materials: Principles and practice Edited by H Hocheng, National...
The prediction of cutting forces is essential to plan machining operations without unstable vibratio...
[[abstract]]This paper presents the first anisotropic mechanistic model for the force prediction in ...
Analysis of carbon fibre reinforced plastic milling shows that cutting behaviour and the results ach...
The thesis is focused on composite materials with a view to their classifi-cation, identification, u...
Thesis (Master's)--University of Washington, 2017-03There is an ever increasing demand for materials...
Nowadays, weight reducing is become possible with composite materials taking place of steel (60-80\%...
Gypsum fiber composite (GFC) is a kind of building material widely used in interior decoration. Mill...
This paper presents an empirical force model quantifying the effect of fibre volume fraction and fib...
This master´s thesis is focused on fibre–filled composite materials, their distribution, labeling, u...
Composite materials are difficult to machine because of the anisotropy and inhomogeneity of their mi...
This dissertation thesis is focused on the analysis of specific cutting forces and accompanying effe...
AbstractComposite materials are difficult to machine because of the anisotropy and inhomogeneity of ...
AbstractThis paper provides a study on the milling of carbon fiber reinforced laminated composites. ...
AbstractMachining of carbon/carbon (C/C) composite materials is difficult to carry out due to its hi...
Machining technology for composite materials: Principles and practice Edited by H Hocheng, National...
The prediction of cutting forces is essential to plan machining operations without unstable vibratio...
[[abstract]]This paper presents the first anisotropic mechanistic model for the force prediction in ...
Analysis of carbon fibre reinforced plastic milling shows that cutting behaviour and the results ach...