Photocatalytic Activity of Titanium Dioxide Printed Layers

This diploma thesis was focused on the preparation of self-cleaning and photocatalyticaly active titanium dioxide thin films. Transparent and porous thin layers of titanium dioxide were prepared from sol-gel containing titanium tetraisopropoxide (TTIP) as precursor with addition polyethylene glycol (PEG). Transparent thin layers of titanium dioxide were also prepared from colloidal solution titanium dioxide. The immobilization of thin titanium dioxide layers was performed by a sol-gel process on the soda lime glasses. Diffusion of sodium cation from soda lime glasses into titanium dioxide layer were blocked. Sol was deposited by printig method – micropiezo deposition. Sol and thin titanium dioxide layers were characterised by the physical-chemical method. For prepared sol viscosity, density and surface tension were measured. Thickness and hydrophilicity of titanium dioxide layers also were studied. The photocatalytic activity of the printed titanium layers were tested via the photocatalytic degradation of the 2,6-dichlorindophenol. The influence of addition PEG into the sol and influence of sol loading was studied. It was found that the addition of PEG into the sol significantly increased the photocatalytic activity of titanium dioxide layers