This note summarizes the collimation quench test MD with 208Pb82+ beams at 6.37Z TeV in which a quench of a dipole magnet in the dispersion suppressor (DS) downstream of the betatron collimation region (IR7) was achieved. The aim of the test was to experimentally validate the quench limit in this region by means of inducing high losses at the LHC collimation system and quench the magnet with the collimation debris mainly lost at the IR7 DS. It was the first test with heavy-ions in which the transverse damper (ADT) could be used to induce these losses over extended periods of time (approximately 10-15s) while previous tests used tune resonance crossing methods in which the beam loss is less controllable and faster. The quench was achieved at...
The performance of the LHC as a heavy-ion collider is expected to be limited by a variety of beam lo...
The LHC beams are designed to have high stability and to be stored for many hours. The nominal beam ...
The LHC beams are designed to have high stability and to be stored for many hours. The nominal beam ...
The Large Hadron Collider (LHC) has been operating since 2010 at 3.5 TeV and 4.0 TeV without experie...
In 2013, at the end of the LHC physics run I, several quench tests took place with the aim to measur...
A Machine Development study session was held on December 6th, 2011 to test BLM quench thresholds in ...
We show here the analysis of the MD test that aimed to quench the superconducting magnets in the dis...
The LHC superconducting magnets in the dispersion suppressor of IR7 are the most exposed to beam los...
International audienceDuring some periods in its second physics run (2015-2018), the LHC has been op...
International audienceThe LHC heavy-ion program with 208Pb⁸²⁺ beams is foreseen to benefit from a si...
The fast beam losses in the order of 1 ms are expected to be a potential major luminosity limitation...
Beam studies to address the limitations of the Phase~I collimation system were performed. The primar...
At the end of the LHC Run1 a 48-hour quench-test campaign took place to investigate the quench level...
The Large Hadron Collider (LHC) at CERN pushes forward to new regimes in terms of beam energy and in...
The application of superconducting materials in the field of high energy accelerator physics not onl...
The performance of the LHC as a heavy-ion collider is expected to be limited by a variety of beam lo...
The LHC beams are designed to have high stability and to be stored for many hours. The nominal beam ...
The LHC beams are designed to have high stability and to be stored for many hours. The nominal beam ...
The Large Hadron Collider (LHC) has been operating since 2010 at 3.5 TeV and 4.0 TeV without experie...
In 2013, at the end of the LHC physics run I, several quench tests took place with the aim to measur...
A Machine Development study session was held on December 6th, 2011 to test BLM quench thresholds in ...
We show here the analysis of the MD test that aimed to quench the superconducting magnets in the dis...
The LHC superconducting magnets in the dispersion suppressor of IR7 are the most exposed to beam los...
International audienceDuring some periods in its second physics run (2015-2018), the LHC has been op...
International audienceThe LHC heavy-ion program with 208Pb⁸²⁺ beams is foreseen to benefit from a si...
The fast beam losses in the order of 1 ms are expected to be a potential major luminosity limitation...
Beam studies to address the limitations of the Phase~I collimation system were performed. The primar...
At the end of the LHC Run1 a 48-hour quench-test campaign took place to investigate the quench level...
The Large Hadron Collider (LHC) at CERN pushes forward to new regimes in terms of beam energy and in...
The application of superconducting materials in the field of high energy accelerator physics not onl...
The performance of the LHC as a heavy-ion collider is expected to be limited by a variety of beam lo...
The LHC beams are designed to have high stability and to be stored for many hours. The nominal beam ...
The LHC beams are designed to have high stability and to be stored for many hours. The nominal beam ...