During the commissioning phase of the PS Multi-Turn Extraction (MTE) and the following operational period a number of limitations were observed, namely activation of the magnetic septum in straight section 16, fluctuation of the fraction of particles trapped in the islands, and instabilities of the injection trajectories in the SPS. These issues have been addressed in many ways, by either dedicated measurement campaigns or paper studies to determine mitigation measures. In this document the proposed solution of installing a dummy septum in straight section 15 of the PS ring to reduce the activation of the extraction magnetic septum is described in details
In order to satisfy the requirement of the beam injection and extraction of CSR, four magnetic septu...
The design, construction, and installation of pulsed septum magnets for particle accelerators presen...
This report consists of three parts. The first part describes a numerical analysis method for the el...
High activation of the magnetic extraction septum of the CERN PS machine was observed due to the los...
The losses created by the proposed Multi-Turn Extraction (MTE) at the CERN PS induce high activation...
The proposed Multi-Turn Extraction (MTE) for the CERN PS allows reducing the overall extraction loss...
High-activation of the extraction magnetic septum of the CERN PS machine was observed due to the los...
A protection septum has been installed in the CERN PS section 15 in order to mitigate irradiation of...
Pulsed septum magnet for ejection from PS straight sections 61/62 to the East-Hall. This septum magn...
Septum magnet MSE. The one in LSS2 for extraction to the N-Area is still in service. The other one, ...
In the framework of the LIU project, new septa magnets have been designed between CERN's PS booster ...
An opposite-field septum magnet system has been developed for J-PARC main-ring injection. The featur...
A five-turn continuous extraction has up to now been used to transfer the proton beam from the CERN ...
In the Long Straight Section LSS4 of the Super Proton Synchrotron (SPS) at CERN, a new fast extracti...
beam at 105 MeV for the Metrology Light Source MLS of the Physikalisch Technische Bundesanstalt ...
In order to satisfy the requirement of the beam injection and extraction of CSR, four magnetic septu...
The design, construction, and installation of pulsed septum magnets for particle accelerators presen...
This report consists of three parts. The first part describes a numerical analysis method for the el...
High activation of the magnetic extraction septum of the CERN PS machine was observed due to the los...
The losses created by the proposed Multi-Turn Extraction (MTE) at the CERN PS induce high activation...
The proposed Multi-Turn Extraction (MTE) for the CERN PS allows reducing the overall extraction loss...
High-activation of the extraction magnetic septum of the CERN PS machine was observed due to the los...
A protection septum has been installed in the CERN PS section 15 in order to mitigate irradiation of...
Pulsed septum magnet for ejection from PS straight sections 61/62 to the East-Hall. This septum magn...
Septum magnet MSE. The one in LSS2 for extraction to the N-Area is still in service. The other one, ...
In the framework of the LIU project, new septa magnets have been designed between CERN's PS booster ...
An opposite-field septum magnet system has been developed for J-PARC main-ring injection. The featur...
A five-turn continuous extraction has up to now been used to transfer the proton beam from the CERN ...
In the Long Straight Section LSS4 of the Super Proton Synchrotron (SPS) at CERN, a new fast extracti...
beam at 105 MeV for the Metrology Light Source MLS of the Physikalisch Technische Bundesanstalt ...
In order to satisfy the requirement of the beam injection and extraction of CSR, four magnetic septu...
The design, construction, and installation of pulsed septum magnets for particle accelerators presen...
This report consists of three parts. The first part describes a numerical analysis method for the el...