Add to ORKGAn active stabilization system for the Compact Linear Collider (CLIC) Main Beam Quadrupoles (MBQ) is needed to reach the strict requirements necessary to achieve high luminosity. A stiff supporting structure has been designed and is being tested both in simulations and experimentally for optimization and validation. The modal behaviour of the magnet on its supporting device highly affects the performance of the stabilization system. Several numerical modal analysis simulations have been performed and are presented in this paper
The future Compact LInear particle Collider (CLIC) under study at CERN will require to stabilize hea...
The 42km long Drive Beam Decelerator for the Compact Linear Collider (CLIC) requires over 41,000 qua...
A critical magnet family for the future Compact Linear Collider (CLIC) is the Main Beam Quadrupole (...
An active stabilization system for the Compact Linear Collider (CLIC) Main Beam Quadrupoles (MBQ) is...
Mechanical stability to the nanometre and below is required for the Compact Linear Collider (CLIC) q...
The Main Beam Quadrupole (MBQ) magnets represent one of the most populated families of Compact Linea...
To reach the Compact Linear Collider (CLIC) design luminosity, the mechanical jitter of the CLIC mai...
To reach the required luminosity at the CLIC interaction point, about 2000 quadrupoles along each li...
To reach the Compact Linear Collider (CLIC) design luminosity, the mechanical jitter of the CLIC mai...
This thesis describes the research done to provide stabilisation and precision positioning for the m...
The CLIC main beam quadrupoles need to be stabilized to 1.5 nm integrated R.M.S. displacement at 1 H...
Original publication available at http://www.jacow.org/International audienceTo reach the design lum...
In this report, we summarise the work done on the CLIC Main Beam Quadrupole. There are about 4000 MB...
The Compact LInear Collider (CLIC) study at the European Organization for Nuclear Research (CERN) is...
CLIC (Compact Linear Collider) is a study for a future electron-positron collider that would allow p...
The future Compact LInear particle Collider (CLIC) under study at CERN will require to stabilize hea...
The 42km long Drive Beam Decelerator for the Compact Linear Collider (CLIC) requires over 41,000 qua...
A critical magnet family for the future Compact Linear Collider (CLIC) is the Main Beam Quadrupole (...
An active stabilization system for the Compact Linear Collider (CLIC) Main Beam Quadrupoles (MBQ) is...
Mechanical stability to the nanometre and below is required for the Compact Linear Collider (CLIC) q...
The Main Beam Quadrupole (MBQ) magnets represent one of the most populated families of Compact Linea...
To reach the Compact Linear Collider (CLIC) design luminosity, the mechanical jitter of the CLIC mai...
To reach the required luminosity at the CLIC interaction point, about 2000 quadrupoles along each li...
To reach the Compact Linear Collider (CLIC) design luminosity, the mechanical jitter of the CLIC mai...
This thesis describes the research done to provide stabilisation and precision positioning for the m...
The CLIC main beam quadrupoles need to be stabilized to 1.5 nm integrated R.M.S. displacement at 1 H...
Original publication available at http://www.jacow.org/International audienceTo reach the design lum...
In this report, we summarise the work done on the CLIC Main Beam Quadrupole. There are about 4000 MB...
The Compact LInear Collider (CLIC) study at the European Organization for Nuclear Research (CERN) is...
CLIC (Compact Linear Collider) is a study for a future electron-positron collider that would allow p...
The future Compact LInear particle Collider (CLIC) under study at CERN will require to stabilize hea...
The 42km long Drive Beam Decelerator for the Compact Linear Collider (CLIC) requires over 41,000 qua...
A critical magnet family for the future Compact Linear Collider (CLIC) is the Main Beam Quadrupole (...