PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURNAROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC.

Status of CLIC Magnets Studies

Modena, Michele
Vorozhtsov, Alexey

December 2011

R&D Magnets activities for CLIC Project have now entered a new phase with the design & manufacturing...

Performances of the Main Beam Quadrupole Type1 Prototypes for CLIC

Modena, M
Bartalesi, A
Garcia Perez, J
Leuxe, R
Perrin-Bonnet, G
Petrone, C
Struik, M
Vorozhtsov, A

February 2014

A critical magnet family for the future Compact Linear Collider (CLIC) is the Main Beam Quadrupole (...

CLIC two-beam module design and integration

Riddone, G
Samoshkin, A
Gudkov, D

September 2010

Abstract The Compact LInear Collider (CLIC) is based on twobeam acceleration concept currently devel...

PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURN-AROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC

Vorozhtsov, A

July 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE POST COLLISION LINE

Vorozhtsov, A

September 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE POST COLLISION LINE.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS

Vorozhtsov, A

August 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM MAGNETS REQUIRED FOR THE BEAM TRANSPORT. Project Breakdown Structure (PBS): 1.3

Vorozhtsov, A

April 2011

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

Novel Tunable Permanent Magnet Quadrupoles for the CLIC Drive Beam

Clarke, J A
Collomb, N A
Shepherd, B J A
Stokes, D G
Bartalesi, A
Modena, M
Struik, M

January 2014

Two novel designs have been generated for permanent magnet-based quadrupoles for the Compact Linear ...

RF Design of the TW Buncher for the CLIC Drive Beam Injector (2nd report)

Shaker, Hamed

June 2016

CLIC is based on the two beams concept that one beam (drive beam) produces the required RF power to ...

Design and Manufacture of a Main Beam Quadrupole Model for CLIC

Modena, Michele
Vorozhtsov, Alexey

February 2012

The Main Beam Quadrupole (MBQ) magnets represent one of the most populated families of Compact Linea...

Design Considerations of the Final Turnaround Regions for the CLIC Drive Beam

Apsimon, R
Esberg, J
Latina, A
Schulte, D
Uythoven, J

September 2014

The optics design of the final turnaround regions for the CLIC drive beam is presented. This include...

Design of the Clic main Linac accelerating structure for Clic conceptual design report

Grudiev, A
Wuensch, W

September 2010

Abstract The design of the CLIC main linac accelerating structure has been refined based on an impro...

Design specifications for the extraction elements of the CLIC drive beam combiners rings

Apsimon, Robert
Esberg, Jakob

August 2014

In this paper we present updated design specifications for the combiner ring extraction kickers and ...

Status of CLIC Magnets Studies

Modena, Michele
Vorozhtsov, Alexey

December 2011

R&D Magnets activities for CLIC Project have now entered a new phase with the design & manufacturing...

Performances of the Main Beam Quadrupole Type1 Prototypes for CLIC

Modena, M
Bartalesi, A
Garcia Perez, J
Leuxe, R
Perrin-Bonnet, G
Petrone, C
Struik, M
Vorozhtsov, A

February 2014

A critical magnet family for the future Compact Linear Collider (CLIC) is the Main Beam Quadrupole (...

CLIC two-beam module design and integration

Riddone, G
Samoshkin, A
Gudkov, D

September 2010

Abstract The Compact LInear Collider (CLIC) is based on twobeam acceleration concept currently devel...

PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURN-AROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC

Vorozhtsov, A

July 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE POST COLLISION LINE

Vorozhtsov, A

September 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE POST COLLISION LINE.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS

Vorozhtsov, A

August 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM MAGNETS REQUIRED FOR THE BEAM TRANSPORT. Project Breakdown Structure (PBS): 1.3

Vorozhtsov, A

April 2011

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

Novel Tunable Permanent Magnet Quadrupoles for the CLIC Drive Beam

Clarke, J A
Collomb, N A
Shepherd, B J A
Stokes, D G
Bartalesi, A
Modena, M
Struik, M

January 2014

Two novel designs have been generated for permanent magnet-based quadrupoles for the Compact Linear ...

RF Design of the TW Buncher for the CLIC Drive Beam Injector (2nd report)

Shaker, Hamed

June 2016

CLIC is based on the two beams concept that one beam (drive beam) produces the required RF power to ...

Design and Manufacture of a Main Beam Quadrupole Model for CLIC

Modena, Michele
Vorozhtsov, Alexey

February 2012

The Main Beam Quadrupole (MBQ) magnets represent one of the most populated families of Compact Linea...

Design Considerations of the Final Turnaround Regions for the CLIC Drive Beam

Apsimon, R
Esberg, J
Latina, A
Schulte, D
Uythoven, J

September 2014

The optics design of the final turnaround regions for the CLIC drive beam is presented. This include...

Design of the Clic main Linac accelerating structure for Clic conceptual design report

Grudiev, A
Wuensch, W

September 2010

Abstract The design of the CLIC main linac accelerating structure has been refined based on an impro...

Design specifications for the extraction elements of the CLIC drive beam combiners rings

Apsimon, Robert
Esberg, Jakob

August 2014

In this paper we present updated design specifications for the combiner ring extraction kickers and ...

Status of CLIC Magnets Studies

Modena, Michele
Vorozhtsov, Alexey

December 2011

R&D Magnets activities for CLIC Project have now entered a new phase with the design & manufacturing...

Performances of the Main Beam Quadrupole Type1 Prototypes for CLIC

Modena, M
Bartalesi, A
Garcia Perez, J
Leuxe, R
Perrin-Bonnet, G
Petrone, C
Struik, M
Vorozhtsov, A

February 2014

A critical magnet family for the future Compact Linear Collider (CLIC) is the Main Beam Quadrupole (...

CLIC two-beam module design and integration

Riddone, G
Samoshkin, A
Gudkov, D

September 2010

Abstract The Compact LInear Collider (CLIC) is based on twobeam acceleration concept currently devel...

PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURNAROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC.

Abstract

Extracted data

PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURNAROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC.

Abstract

Extracted data

Related items

Related items