PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS

PRELIMINARY STRUCTURE DESIGN OF THE MAIN MAGNET FOR THE 100MEV CYCLOTRON

Chengjie Chu
Junqing Zhong
Tianjue Zhang
Zhiguo Yin
Jiansheng Xing
Jianjun Yang
Shigang Hou

July 2015

This paper presents the preliminary design of the 100MeV compact cyclotron main magnet for the BRIF ...

Novel Tunable Permanent Magnet Quadrupoles for the CLIC Drive Beam

Clarke, J A
Collomb, N A
Shepherd, B J A
Stokes, D G
Bartalesi, A
Modena, M
Struik, M

January 2014

Two novel designs have been generated for permanent magnet-based quadrupoles for the Compact Linear ...

Design and Manufacturing Description of the Prototype Striplines for the Extraction Kicker of the CLIC Damping Rings

Belver-Aguilar, C
Barnes, M J
Faus-Golfe, A
Gómez, J
Gutiérrez, D
Toral, F

July 2013

The Pre-Damping Rings (PDRs) and Damping Rings (DRs) of CLIC are needed to reduce the beam emittance...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE POST COLLISION LINE

Vorozhtsov, A

September 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE POST COLLISION LINE.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM MAGNETS REQUIRED FOR THE BEAM TRANSPORT. Project Breakdown Structure (PBS): 1.3

Vorozhtsov, A

April 2011

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURN-AROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC

Vorozhtsov, A

July 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURNAROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

Longitudinally Variable Field Dipole Design Using Permanent Magnets For CLIC Damping Rings

Dominguez Martinez, Manuel Angel
Toral, Fernando
Ghasem, Hossein
Papadopoulou, Parthena Stefania
Papaphilippou, Yannis

January 2018

The latest CLIC damping ring lattice is based on magnets with longitudinally variable dipole fields ...

Design and Manufacture of a Main Beam Quadrupole Model for CLIC

Modena, Michele
Vorozhtsov, Alexey

February 2012

The Main Beam Quadrupole (MBQ) magnets represent one of the most populated families of Compact Linea...

CLIC Detector Main Solenoid Design & Status Report

Gaddi, Andrea
Cure, Benoit
Herve, Alain

January 2012

The magnet system for the CLIC Detector concepts is composed of the central solenoid in combination ...

Design specifications for the extraction elements of the CLIC drive beam combiners rings

Apsimon, Robert
Esberg, Jakob

August 2014

In this paper we present updated design specifications for the combiner ring extraction kickers and ...

CLIC Main Beam Quadrupole Eigen Mode computation

Deleglise, Guillaume

January 2010

In this report, we summarise the work done on the CLIC Main Beam Quadrupole. There are about 4000 MB...

Design of the Clic main Linac accelerating structure for Clic conceptual design report

Grudiev, A
Wuensch, W

September 2010

Abstract The design of the CLIC main linac accelerating structure has been refined based on an impro...

PRELIMINARY STRUCTURE DESIGN OF THE MAIN MAGNET FOR THE 100MEV CYCLOTRON

Chengjie Chu
Junqing Zhong
Tianjue Zhang
Zhiguo Yin
Jiansheng Xing
Jianjun Yang
Shigang Hou

July 2015

This paper presents the preliminary design of the 100MeV compact cyclotron main magnet for the BRIF ...

Novel Tunable Permanent Magnet Quadrupoles for the CLIC Drive Beam

Clarke, J A
Collomb, N A
Shepherd, B J A
Stokes, D G
Bartalesi, A
Modena, M
Struik, M

January 2014

Two novel designs have been generated for permanent magnet-based quadrupoles for the Compact Linear ...

Design and Manufacturing Description of the Prototype Striplines for the Extraction Kicker of the CLIC Damping Rings

Belver-Aguilar, C
Barnes, M J
Faus-Golfe, A
Gómez, J
Gutiérrez, D
Toral, F

July 2013

The Pre-Damping Rings (PDRs) and Damping Rings (DRs) of CLIC are needed to reduce the beam emittance...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE POST COLLISION LINE

Vorozhtsov, A

September 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE POST COLLISION LINE.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC MAIN BEAM MAGNETS REQUIRED FOR THE BEAM TRANSPORT. Project Breakdown Structure (PBS): 1.3

Vorozhtsov, A

April 2011

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURN-AROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC

Vorozhtsov, A

July 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

PRELIMINARY DESIGN OF CLIC DRIVE BEAM MAGNETS REQUIRED FOR THE: DELAY LINE, COMBINER RINGS, TURNAROUND, TRANSPORT TO TUNNEL, LONG TRANSFER LINE AND INJECTOR LINAC.

Vorozhtsov, A

January 2010

This document describes the preliminary electromagnetic design of the warm magnets required for the ...

Longitudinally Variable Field Dipole Design Using Permanent Magnets For CLIC Damping Rings

Dominguez Martinez, Manuel Angel
Toral, Fernando
Ghasem, Hossein
Papadopoulou, Parthena Stefania
Papaphilippou, Yannis

January 2018

The latest CLIC damping ring lattice is based on magnets with longitudinally variable dipole fields ...

Design and Manufacture of a Main Beam Quadrupole Model for CLIC

Modena, Michele
Vorozhtsov, Alexey

February 2012

The Main Beam Quadrupole (MBQ) magnets represent one of the most populated families of Compact Linea...

CLIC Detector Main Solenoid Design & Status Report

Gaddi, Andrea
Cure, Benoit
Herve, Alain

January 2012

The magnet system for the CLIC Detector concepts is composed of the central solenoid in combination ...

Design specifications for the extraction elements of the CLIC drive beam combiners rings

Apsimon, Robert
Esberg, Jakob

August 2014

In this paper we present updated design specifications for the combiner ring extraction kickers and ...

CLIC Main Beam Quadrupole Eigen Mode computation

Deleglise, Guillaume

January 2010

In this report, we summarise the work done on the CLIC Main Beam Quadrupole. There are about 4000 MB...

Design of the Clic main Linac accelerating structure for Clic conceptual design report

Grudiev, A
Wuensch, W

September 2010

Abstract The design of the CLIC main linac accelerating structure has been refined based on an impro...

PRELIMINARY STRUCTURE DESIGN OF THE MAIN MAGNET FOR THE 100MEV CYCLOTRON

Chengjie Chu
Junqing Zhong
Tianjue Zhang
Zhiguo Yin
Jiansheng Xing
Jianjun Yang
Shigang Hou

July 2015

This paper presents the preliminary design of the 100MeV compact cyclotron main magnet for the BRIF ...

Novel Tunable Permanent Magnet Quadrupoles for the CLIC Drive Beam

Clarke, J A
Collomb, N A
Shepherd, B J A
Stokes, D G
Bartalesi, A
Modena, M
Struik, M

January 2014

Two novel designs have been generated for permanent magnet-based quadrupoles for the Compact Linear ...

Design and Manufacturing Description of the Prototype Striplines for the Extraction Kicker of the CLIC Damping Rings

Belver-Aguilar, C
Barnes, M J
Faus-Golfe, A
Gómez, J
Gutiérrez, D
Toral, F

July 2013

The Pre-Damping Rings (PDRs) and Damping Rings (DRs) of CLIC are needed to reduce the beam emittance...

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS

Abstract

Extracted data

PRELIMINARY DESIGN OF CLIC MAIN BEAM NORMAL CONDUCTING MAGNETS REQUIRED FOR THE DAMPING RINGS

Abstract

Extracted data

Related items

Related items