Durability of mortars modified by the effect of combining SPA polymers and supplementary cementitious materials

Nowadays, the major concern of professionals in the field of building materials is to improve the properties induced by the addition of different additives (polymers) and mineral additions (Supplementary Cement Materials SCMs) and to eventually adapt them to a particular application. This race towards performance has resulted in mortar formulations that are increasingly complex and rich in diversified additions. This is an industry-friendly practice since it generally yields a mortar modified by the combination of a polymer and SCMs, at low cost and low environmental impact, with an improved sustainability in the long term. In order to improve the durability of SCM-modified repair mortars, it seemed interesting to evaluate the influence of adding the styrene polyacrylic (SPA) Latex on the properties of these mortars when exposed to aggressive media such as acids. Composite mortars based on pozzolanic mineral additions, containing different levels of 0.5%, 1% and 2%w latex, were stored in acid solutions, for various periods of immersion. The analysis of the microstructure of these mortars, after exposure to acid attack, was carried out by FTIR spectroscopy. The results obtained allowed to demonstrate the beneficial effect of adding the SPA polymer and the pozzolanic additions to the modified materials and to show their improved resistance to acid attacks, such as HNO3 and H3PO4 solutions at 8%. The best durability properties of the mortars modified by the combination of the polymer and the additional cementitious materials observed in this study indicate a longer service life of the repaired structure when using this type of Latex-modified repair materials