Manometric Tubular Springs Oscillatory Processes Modeling with Consideration of its Viscoelastic Properties

This article is dedicated to the operation and management of systems of machine-building and aviation enterprises, systems of production, transport, storage of oil and gas, issues of control of technological processes are of great importance. Control of technological processes is carried out by monitoring the pressure and other parameters. These measuring instruments must have high reliability and the necessary accuracy. In this connection, there is a sharp increase in interest in determining the dynamic parameters of the elements of measuring devices. The main elements of such devices are monomeric tubular springs (Bourdon tubes). The paper considers the natural and forced steady-state oscillations of a thin curved rod interacting with a liquid. Based on the principle of possible displacements, a resolving system of partial differential equations and the corresponding boundary conditions are obtained. The problem is solved numerically by the Godunov orthogonal run method, and the Muller method and the Eigen frequencies found are compared with the experimental results. As a result, for a given axial perturbation, it was possible to select such an effect, in the orthogonal direction, that the amplitude of the longitudinal vibrations of the rod at the first resonance decreased by 20 times. The described vibration damping effect is due to the interrelation of transverse and longitudinal vibrations and is fundamentally impossible in the case of a straight rod