A mode converter that goes from a rib waveguide to a strip waveguide has been demonstrated. The mode converter contains a 3-D taper fabricated using LOCOS. The demonstrated losses are 0.34 dB per coupler.United States. Defense Advanced Research Projects Agency (Air Force Contract FA8721-05-C-0002
We use the LOCal oxidation of silicon (LOCOS) method as a fabrication technique to define submicrome...
A vertical silicon grating coupler that converts the propagation mode order at the waveguide-fiber i...
Abstract: A polarization insensitive strip-slot waveguide mode converter with large fabrication tole...
Two types of low-loss converters between different optical waveguides on silicon-on-insulator are de...
A novel structure of spot-size converter is designed to allow low loss and large alignment tolerance...
Silicon slot waveguide based mode converter was designed for the effective mode conversion and polar...
Silicon slot waveguide based mode converter was designed for the effective mode conversion and polar...
Optical-mode converters are needed to efficiently couple light from an optical fiber to a photonic c...
Silicon rib waveguides enable single-mode (SM) operation even with the combination of multi-micron c...
The single-mode condition for silicon rib waveguides with large cross sections is obtained using a n...
© 2015 Elsevier B.V. All rights reserved. Coupling of optical power from high-density silicon wavegu...
Optical mode mismatch makes coupling between strip and slot waveguides a tough issue in integrated p...
Many structures containing lateral taper waveguide in previous papers showed quite high experimental...
We demonstrate the design, fabrication and experimental characterization of a submicron-scale silico...
TE to TM converters with constant 45 degrees operation are a key component in OEICs for coherent opt...
We use the LOCal oxidation of silicon (LOCOS) method as a fabrication technique to define submicrome...
A vertical silicon grating coupler that converts the propagation mode order at the waveguide-fiber i...
Abstract: A polarization insensitive strip-slot waveguide mode converter with large fabrication tole...
Two types of low-loss converters between different optical waveguides on silicon-on-insulator are de...
A novel structure of spot-size converter is designed to allow low loss and large alignment tolerance...
Silicon slot waveguide based mode converter was designed for the effective mode conversion and polar...
Silicon slot waveguide based mode converter was designed for the effective mode conversion and polar...
Optical-mode converters are needed to efficiently couple light from an optical fiber to a photonic c...
Silicon rib waveguides enable single-mode (SM) operation even with the combination of multi-micron c...
The single-mode condition for silicon rib waveguides with large cross sections is obtained using a n...
© 2015 Elsevier B.V. All rights reserved. Coupling of optical power from high-density silicon wavegu...
Optical mode mismatch makes coupling between strip and slot waveguides a tough issue in integrated p...
Many structures containing lateral taper waveguide in previous papers showed quite high experimental...
We demonstrate the design, fabrication and experimental characterization of a submicron-scale silico...
TE to TM converters with constant 45 degrees operation are a key component in OEICs for coherent opt...
We use the LOCal oxidation of silicon (LOCOS) method as a fabrication technique to define submicrome...
A vertical silicon grating coupler that converts the propagation mode order at the waveguide-fiber i...
Abstract: A polarization insensitive strip-slot waveguide mode converter with large fabrication tole...