Photovoltaic cell efficiency at elevated temperatures

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 23).In order to determine what type of photovoltaic solar cell could best be used in a thermoelectric photovoltaic hybrid power generator, we tested the change in efficiency due to higher temperatures of three types of solar cells: a polymer cell, an amorphous silicon cell and a CIS cell. Using an AM1.5 G solar simulator at 973 W/m2 we took the I-V curve of each of the three cells at increasing temperatures. We used the I-V curve to find the maximum power and determine the efficiency of each cell with respect to temperature. We found that the CIS cell had an efficiency of 10% and the performance decreased with respect to temperature in a non-linear manner. The efficiency at 83*C was a peak and the same efficiency as at 40"C. We found that the amorphous silicon cell tested had an efficiency of 4% at 450C that decreased with respect to temperature in a linear manner such that an 800C increase in temperature resulted in an efficiency of 3%. We further found that the polymer cell efficiency decreased from 1.1% to 1% with a 60*C increase in temperature, but that the polymer cell is destroyed at temperatures higher than 1 00*C. We determined that CIS or amorphous silicon could be suitable materials for the photovoltaic portion of the hybrid system.by Katherine Leung Ray.S.B