Study on Propagation Behaviors of Hydraulic Fracture Network in Tight Sandstone Formation with Closed Cemented Natural Fractures

Natural fractures in tight sandstone formation play a significant role in fracture network generation during hydraulic fracturing. This work presents an experimental model of tight sandstone with closed cemented preexisting fractures. The influence of closed cemented fractures’ (CCF) directions on the propagation behavior of hydraulic fracture (HF) is studied based on the hydraulic fracturing experiment. A field-scaled numerical model used to simulate the propagation of HF is established based on the flow-stress-damage (FSD) coupled method. This model contains the discrete fracture network (DFN) generated by the Monte-Carlo method and is used to investigate the effects of CCFs’ distribution, CCFs’ strength, and in-situ stress anisotropy, injection rate, and fluid viscosity on the propagation behavior of fracture network. The results show that the distribution direction of CCFs is critical for the formation of complex HFs. When the angle between the horizontal maximum principal stress direction and the CCFs is in the range of 30° to 60°, the HF network is the most complex. There are many kinds of compound fracture propagation patterns, such as crossing, branching, and deflection. The increase of CCFs’ strength is not conducive to the generation of branched and deflected fractures. When the in-situ stress difference ranges from 3 MPa to 6 MPa, the HF network’s complexity and propagation range can be guaranteed simultaneously. The increase in the injection rate will promote the formation of the complex HF network. The proper increase of fracturing fluid viscosity can promote HF’s propagation. However, when the viscosity is too high, the complex HFs only appear around the wellbore. The research results can provide new insights for the hydraulic fracturing optimization design of naturally fractured tight sandstone formation