In this paper, the laser cladding is created by using Co50 powder and TiC mixture, covering a H13 hot-working steel substrate. The samples are analyzed by the hardness test, XRD, SEM, and friction test to identify the forming phases, microhardness distribution, and wear-resistant characteristics. The results indicated that hardness reduces from the coating zone to the substrate, achieving the highest value at the coating zone. Increasing the content of TiC results in improving the coating hardness. The coatings with 10%–20% TiC show high-quality surface morphology and macrograph. With 30% TiC, the hardness obtains a higher hardness, but the surface appears to crack. The microstructures of the coatings present a well-mixed and well-distribut...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
The wear behaviour of laser-clad TiC-Ni alloy coatings was studied by X-ray diffraction, scanning el...
Extensive studies have been conducted on high entropy alloy composite coatings reinforced with micro...
H13 steel surfaces are covered by coatings of Co-based alloy with 0, 10, 20, and 30 wt. % TiC using ...
Laser cladding of Co50 alloy coating and Co50 composite coatings doped with 10, 20, and 30 wt.% TiC ...
High temperature wear properties of titanium carbide (TiC) composite coatings fabricated by laser cl...
The TaC/TiC/Stellite X-40 Co-based composite coatings with different contents were successfully clad...
High−temperature wear failure has been a major challenge to die parts. This work provides a comprehe...
High−temperature wear failure has been a major challenge to die parts. This work provides a comprehe...
This article presents production results concerning metal matrix composite-coatings made using the l...
Coating possesses superior wear resistance which makes the material suitable for components subject...
Coating possesses superior wear resistance which makes the material suitable for components subject...
The wear behaviour of laser-clad TiC-Ni alloy coatings was studied by X-ray diffraction, scanning el...
The wear behaviour of laser-clad TiC-Ni alloy coatings was studied by X-ray diffraction, scanning el...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
The wear behaviour of laser-clad TiC-Ni alloy coatings was studied by X-ray diffraction, scanning el...
Extensive studies have been conducted on high entropy alloy composite coatings reinforced with micro...
H13 steel surfaces are covered by coatings of Co-based alloy with 0, 10, 20, and 30 wt. % TiC using ...
Laser cladding of Co50 alloy coating and Co50 composite coatings doped with 10, 20, and 30 wt.% TiC ...
High temperature wear properties of titanium carbide (TiC) composite coatings fabricated by laser cl...
The TaC/TiC/Stellite X-40 Co-based composite coatings with different contents were successfully clad...
High−temperature wear failure has been a major challenge to die parts. This work provides a comprehe...
High−temperature wear failure has been a major challenge to die parts. This work provides a comprehe...
This article presents production results concerning metal matrix composite-coatings made using the l...
Coating possesses superior wear resistance which makes the material suitable for components subject...
Coating possesses superior wear resistance which makes the material suitable for components subject...
The wear behaviour of laser-clad TiC-Ni alloy coatings was studied by X-ray diffraction, scanning el...
The wear behaviour of laser-clad TiC-Ni alloy coatings was studied by X-ray diffraction, scanning el...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a p...
The wear behaviour of laser-clad TiC-Ni alloy coatings was studied by X-ray diffraction, scanning el...
Extensive studies have been conducted on high entropy alloy composite coatings reinforced with micro...