Bottom Detection Method of Side-Scan Sonar Image for AUV Missions

In order to obtain the measurement parameters of the sea bottom geomorphology or underwater objects, the first step in side-scan sonar (SSS) image processing is bottom detection. Due to the complexity of the marine environment, the acoustic signals received by SSS are usually polluted by noises, which affect its image quality and make the extraction of image features difficult. To address this problem, this study proposes an automatic detection method for the sea bottom line based on the actual experimental acquisition of SSS images, which is supposed to support the autonomous underwater vehicle (AUV) for intelligent target detection and classification. The proposed method comprises four main steps. First, the raw SSS data is analyzed to obtain a grayscale image, and the blind zone boundary of the image is obtained using the threshold method. Then, the noise characteristics of the image are analyzed and the denoising algorithm is optimized to effectively remove high-frequency noise. Next, spatial-temporal matching calculations are performed on each ping port and starboard data, and the accurate coordinates of first bottom returns are obtained through extreme value detection. Finally, automatic and accurate detection of the bottom line is realized according to the smooth processing of the coordinate sequence of first bottom returns. The experiments have demonstrated the effectiveness of the proposed method. As the method does not require human intervention in adjusting parameters during operation, the proposed method with a certain time window imposed during image acquisition will be suitable for AUV missions when the SSS is determined