The evaluation of the production of the shaped part using the workshop programming method on the two-spindle multi-axis CTX alpha 500 lathe

The article deals with the description of the production of a shaped part composed of an outer pyramid and cylindrical surface, of inner cylindrical surfaces of different diameters and of an inner tongue groove. It describes the proposed tools and tool holders resulting from the technological process. In order to meet the required tolerances and shape deviations for the given component, the CTX alpha 500 two-spindle multi-axis CNC lathe was chosen for its production. Its control system enables the workshop method of programming and simulation of individual operations in automatic mode or in block-by-block mode. The design of the selected CNC lathe enables the machining of rotary parts in one clamping, which is ensured by the right and left spindle with chucks. The surface quality of the pyramidal surface and the internal diameter of D18H8 was measured using a Hommel Etamic W5 roughness gauge. The measured roughness values for the hole were: D = 18H8, Rz = 3.007 μm, Ra = 0.729 μm and for the pyramidal surface: Rz = 1.527 μm and Ra = 0.329 μm