Add to ORKGElectrostatic pickup station, with 4 electrodes, to measure beam position in the horizontal and vertical plane. This type is used in the transfer lines leaving the PS (TT2, TTL2, TT70). See also 8206063, where the electrode shapes are clearly visible
A cylindrical beam-position monitor (BPM) used in many accelerator facilities has four electrodes on...
To monitor the position of the electron beam during transport from the Booster Synchrotron to the St...
A cylindrical beam-position monitor (BPM) used in many accelerator facilities has four electrodes on...
The beam position around the 4 rings of the PS Booster (originally 800 MeV, now 1.4 GeV), is measure...
The response of electrostatic button-type pickups for the measurement of the transverse position of ...
This model was used for calibration measurements (beam simulated by RF voltage on a wire, plus x-y d...
A series of electrostatic pick-up electrodes is used to measure the horizontal position of a single ...
International audienceBeam Position Monitors (BPM) measure the beam transverse position, the beam ph...
An Inductive Pick-Up (IPU) senses the azimuthal distribution of the beam image current. Its construc...
The Antiproton Project, launched for proton-antiproton collisions in the SPS (SPS collider), had a s...
Energy beam position monitors (EBPM) based on grounded co-planar waveguide (GCPW) transmission lines...
Electrostatic beam-position monitor installed in its final location (bake-out cover removed). The IS...
The low beta of proton or ion beams favors an electrostatic pickup to measure the transverse beam ce...
The position of a charged particle beam can be measured with a Beam Position Monitor (BPM) by conver...
An Inductive Pick-Up (IPU) senses the azimuthal distribution of the beam image current. Its construc...
A cylindrical beam-position monitor (BPM) used in many accelerator facilities has four electrodes on...
To monitor the position of the electron beam during transport from the Booster Synchrotron to the St...
A cylindrical beam-position monitor (BPM) used in many accelerator facilities has four electrodes on...
The beam position around the 4 rings of the PS Booster (originally 800 MeV, now 1.4 GeV), is measure...
The response of electrostatic button-type pickups for the measurement of the transverse position of ...
This model was used for calibration measurements (beam simulated by RF voltage on a wire, plus x-y d...
A series of electrostatic pick-up electrodes is used to measure the horizontal position of a single ...
International audienceBeam Position Monitors (BPM) measure the beam transverse position, the beam ph...
An Inductive Pick-Up (IPU) senses the azimuthal distribution of the beam image current. Its construc...
The Antiproton Project, launched for proton-antiproton collisions in the SPS (SPS collider), had a s...
Energy beam position monitors (EBPM) based on grounded co-planar waveguide (GCPW) transmission lines...
Electrostatic beam-position monitor installed in its final location (bake-out cover removed). The IS...
The low beta of proton or ion beams favors an electrostatic pickup to measure the transverse beam ce...
The position of a charged particle beam can be measured with a Beam Position Monitor (BPM) by conver...
An Inductive Pick-Up (IPU) senses the azimuthal distribution of the beam image current. Its construc...
A cylindrical beam-position monitor (BPM) used in many accelerator facilities has four electrodes on...
To monitor the position of the electron beam during transport from the Booster Synchrotron to the St...
A cylindrical beam-position monitor (BPM) used in many accelerator facilities has four electrodes on...