Add to ORKGTranfer line TT60 from SPS LSS6 towards the W-Area. View in the direction of the beam. After the magnet, there is a secondary-emission profile monitor, followed by a secondary-emission split-foil (for centering the beam). A TV camera (sticking up prominently) looks at a scintillator screen. The huge tank (with a person standing behind it) houses a beam dump (allowing setting- up of extraction without sending a beam to the W-Area)
Fluorescent screens in front of the target positions allow a precise adjustement in front of them. A...
The new fast extraction system in LSS4 of the SPS and the transfer line TT40 were commissioned with ...
A new optics was introduced in the SPS for improving beam stability at high intensity. For transferr...
The proton beam arriving from bottom is cut into three parts by the special steel septum magnets, se...
Studies for the SPS Beam Dump Facility (BDF) are ongoing within the scope of the Physics Beyond Coll...
The Antiproton Project, launched for proton-antiproton collisions in the SPS (SPS collider), had a s...
The new fast extraction system in LSS6 of the SPS and the first 100 m of transfer line TT60 was comm...
The 7 TeV proton beam from the LHC ring is ejected through a long transfer line to beam dump blocks,...
A well matched injection in the SPS is very important for preserving the emittance of the LHC beam. ...
A diagnostics beamline has been set-up at the BX05 bending magnet of the SLS storage ring. It makes ...
A diagnostics beamline has been set-up at the BX05 bending magnet of the SLS storage ring. It makes ...
A well matched injection in the SPS is very important for preserving the emittance of the LHC beam. ...
Since several years the values of the emittance of the fixed-target beam measured with SEM-wires in ...
Image of the first beam spot on the last BTV screen traversed by the beam during the TI 2 test
Bunch to bunch beam profile measurements provide a valuable tool to control the injection lines to t...
Fluorescent screens in front of the target positions allow a precise adjustement in front of them. A...
The new fast extraction system in LSS4 of the SPS and the transfer line TT40 were commissioned with ...
A new optics was introduced in the SPS for improving beam stability at high intensity. For transferr...
The proton beam arriving from bottom is cut into three parts by the special steel septum magnets, se...
Studies for the SPS Beam Dump Facility (BDF) are ongoing within the scope of the Physics Beyond Coll...
The Antiproton Project, launched for proton-antiproton collisions in the SPS (SPS collider), had a s...
The new fast extraction system in LSS6 of the SPS and the first 100 m of transfer line TT60 was comm...
The 7 TeV proton beam from the LHC ring is ejected through a long transfer line to beam dump blocks,...
A well matched injection in the SPS is very important for preserving the emittance of the LHC beam. ...
A diagnostics beamline has been set-up at the BX05 bending magnet of the SLS storage ring. It makes ...
A diagnostics beamline has been set-up at the BX05 bending magnet of the SLS storage ring. It makes ...
A well matched injection in the SPS is very important for preserving the emittance of the LHC beam. ...
Since several years the values of the emittance of the fixed-target beam measured with SEM-wires in ...
Image of the first beam spot on the last BTV screen traversed by the beam during the TI 2 test
Bunch to bunch beam profile measurements provide a valuable tool to control the injection lines to t...
Fluorescent screens in front of the target positions allow a precise adjustement in front of them. A...
The new fast extraction system in LSS4 of the SPS and the transfer line TT40 were commissioned with ...
A new optics was introduced in the SPS for improving beam stability at high intensity. For transferr...
