Continuous pressure measurement and serial micro-computed tomography analysis during injection laryngoplasty: A preliminary canine cadaveric study.

Injection laryngoplasty (IL) has been used to treat various types of glottal insufficiency. The precise volume and location of the injected materials impact the outcomes. However, exactly how increasing volumes of material are distributed is unknown. In fact, the amount of IL material required to medialize a vocal cord tends to be determined empirically. Thus, the goal of this study was to investigate the pattern of IL material distribution by checking serial micro-computed tomography (MCT) and pressure changes during ILs. This experimental study used 10 excised canine larynges. Experimental devices included the IL syringe, pressure sensor, infusion pump, fixed frame, and monitoring system. We injected calcium hydroxyapatite in the thyroarytenoid muscle; whenever 0.1 mL of material was injected, we obtained an MCT scan while simultaneously measuring the pressure. After the experiments, we performed histologic analyses. MCT analyses showed that materials initially expanded centrifugally and then expanded in all directions within the muscle. The pressure initially increased rapidly but then remained relatively constant until the point at which the materials expanded in multiple directions. Histologic analyses showed that the IL material tended to expand within the epimysium of the thyroarytenoid muscle. However, in some cases, the MCT revealed that there were leakages to the surrounding space with a corresponding pressure drop. If the IL material passes through the epimysium, leakage can occur in the surrounding space, which can account for the reduction in resistance during ILs