In situ alloying of aluminium-based alloys by (multi-)wire-arc additive manufacturing

Wire-arc additive manufacturing (WAAM) has received considerable attention in the past years due to advantages in terms of deposition rate, design freedom, buy-to-fly ratio and economic factors. This process can generally be conducted using conventional or near-conventional welding equipment to fabricate intricate but relatively large-scale structures. The present contribution explores options to utilize this novel process not only for manufacturing of particular aluminium structures, but to create the actual alloy composition during processing. Thereby, the possibilities of dual-wire techniques based on cold metal transfer (CMT) to create alloys in the welding process in situ is investigated. For this purpose, a modified CMT twin welding system is used with standard wires differing significantly in their alloying content. The characterization of the chemical compositions at different specimen positions suggests good chemical homogeneity after initial process optimization steps. The microstructural homogeneity is analysed by means of optical light microscopy and scanning electron microscopy. Quantified phase fractions underpin non-equilibrium solidification conditions, when compared to theoretical equilibrium predictions. The assessment of the performed analyses suggests that dual-wire processes are powerful in terms of enhancing achievable depositions rates as well as enabling in situ alloying. This approach might be expandable to multi-wire-based techniques