IntroductionCyclones are widely used to separate solid particles from the fluid phase. Due to the ease of construction, low running costs, and hard-working conditions at high temperatures, people's interest in using cyclones is increasing day by day. Engineers are generally interested in two parameters to perform a complete evaluation of the design and operation of a cyclone. These parameters are the particle collecting efficiency and the pressure drop inside the cyclone. The precise prediction of the pressure drop in cyclone is very important which it is directly related to operating costs.Computational Fluid Dynamics (CFD) is a diversified tool for predicting flow behavior in a wide range of design and operational conditions. Numerical so...
The paper shows the analysis of the effect of introduction of an exit tube into the cylindrical part...
In this paper, two small cyclones with the same hydraulic diameter and volume, which one is square a...
Cyclone separators are commonly used for separating dispersed solid particles from gas phase. These ...
Cyclone is one of the most important components of pneumatic conveying system which is used for sepa...
A computational fluid dynamics model was developed for air cyclone separator in order to predict the...
Cyclone separators are very useful equipment for particle removal from gaseous streams. Their simple...
This paper presents the results obtained from the application of a computational fluid dynamics (C F...
This paper presents the results obtained from the application of computational fluid dynamics (CFD) ...
International audienceThe aim of this work is to design a cyclone separator, which could reach the h...
In this paper, two small cyclones with the same hydraulic diameter and volume, which one is square a...
In the present study, through Computational Fluid Dynamics techniques, the performance characterizat...
This paper presents the results obtained from the application of computational fluid dynamics (CFD) ...
Cyclones are one of the most widely used gas-solid separators in circulating fluidized bed (CFB) sys...
AbstractThis paper presents a numerical study of the gas–powder flow in a typical Lapple cyclone. Th...
Cyclone separation is one of the largely recognized methods of removing particulate in air, gas or w...
The paper shows the analysis of the effect of introduction of an exit tube into the cylindrical part...
In this paper, two small cyclones with the same hydraulic diameter and volume, which one is square a...
Cyclone separators are commonly used for separating dispersed solid particles from gas phase. These ...
Cyclone is one of the most important components of pneumatic conveying system which is used for sepa...
A computational fluid dynamics model was developed for air cyclone separator in order to predict the...
Cyclone separators are very useful equipment for particle removal from gaseous streams. Their simple...
This paper presents the results obtained from the application of a computational fluid dynamics (C F...
This paper presents the results obtained from the application of computational fluid dynamics (CFD) ...
International audienceThe aim of this work is to design a cyclone separator, which could reach the h...
In this paper, two small cyclones with the same hydraulic diameter and volume, which one is square a...
In the present study, through Computational Fluid Dynamics techniques, the performance characterizat...
This paper presents the results obtained from the application of computational fluid dynamics (CFD) ...
Cyclones are one of the most widely used gas-solid separators in circulating fluidized bed (CFB) sys...
AbstractThis paper presents a numerical study of the gas–powder flow in a typical Lapple cyclone. Th...
Cyclone separation is one of the largely recognized methods of removing particulate in air, gas or w...
The paper shows the analysis of the effect of introduction of an exit tube into the cylindrical part...
In this paper, two small cyclones with the same hydraulic diameter and volume, which one is square a...
Cyclone separators are commonly used for separating dispersed solid particles from gas phase. These ...