This paper reflects a study on the rheology of corn oil in unoxidized state, subjected to forced oxidation treatment. Using the Rheotest2 system, the variation of dynamic viscosity with temperature and shear rate, using oxidized and nonoxidized corn oil, was determined. The oils were heated to 110 °C and 120 °C and the temperature was maintained for 5 to 10 hours. The experiments showed the decrease of dynamic viscosity with temperature and shear rate. The oxidation process causes a sharp increase in the dynamic viscosity of the oxidized corn oil for 10 hours at 120 °C. The measurement of the dynamic viscosity of the oils subjected to the oxidation process is an indicator of the degree of oxidative degradation of vegetable oils
A study was carried out to determine the effect of higher shear rates (64.5 to 4835 s−1) on the abso...
The application of jatropha oil as alternative lubricant basestock has emerged recently. However, th...
In the article, changes in the properties of oils during operation were characterized. The main reas...
The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate a...
Extracted from rapeseed oil was subjected to purification and refining process and then characterize...
Ageing and degradation of lubricant due to oxidation usually is undesirable. However, few studies re...
Ageing and degradation of lubricant due to oxidation usually is undesirable. However, few studies re...
Randomization of fat usually causes an increase in its rate of autoxidation. The reason for this is ...
This article investigates the processes that take place during the forced thermooxidation of sunflow...
Today's concern of protecting the environment has encouraged the research and the use of environment...
During normal operation, oxidation products gradually foul lubricating oil and external contaminants...
Abstract. Viscosity is one of the most important physical parameters that need proper measurement in...
Thermal degradation occurs in all oils during frying, limiting useful fry life as well as quality an...
The aim of the study was to examine and compare oxidative stability of refined (peanut, corn, rice b...
In this study, effect of fatty acid composition on dynamic and steady shear rheology of oils was stu...
A study was carried out to determine the effect of higher shear rates (64.5 to 4835 s−1) on the abso...
The application of jatropha oil as alternative lubricant basestock has emerged recently. However, th...
In the article, changes in the properties of oils during operation were characterized. The main reas...
The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate a...
Extracted from rapeseed oil was subjected to purification and refining process and then characterize...
Ageing and degradation of lubricant due to oxidation usually is undesirable. However, few studies re...
Ageing and degradation of lubricant due to oxidation usually is undesirable. However, few studies re...
Randomization of fat usually causes an increase in its rate of autoxidation. The reason for this is ...
This article investigates the processes that take place during the forced thermooxidation of sunflow...
Today's concern of protecting the environment has encouraged the research and the use of environment...
During normal operation, oxidation products gradually foul lubricating oil and external contaminants...
Abstract. Viscosity is one of the most important physical parameters that need proper measurement in...
Thermal degradation occurs in all oils during frying, limiting useful fry life as well as quality an...
The aim of the study was to examine and compare oxidative stability of refined (peanut, corn, rice b...
In this study, effect of fatty acid composition on dynamic and steady shear rheology of oils was stu...
A study was carried out to determine the effect of higher shear rates (64.5 to 4835 s−1) on the abso...
The application of jatropha oil as alternative lubricant basestock has emerged recently. However, th...
In the article, changes in the properties of oils during operation were characterized. The main reas...