Overheating of low-allow forging steels for nuclear power plant rotors and vessels

Characterization of a high-current tandem accelerator and the associated development of a water-cooled beryllium target for the production of intense neutron beams

Blackburn, Brandon William

January 1997

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1997.Includes bi...

Stress corrosion crack detection in alloy 600 in high temperature caustic

Brisson, Bruce W. (Bruce William)

January 1996

Thesis (Nucl. E.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1996.Include...

Nuclear power plant surveillance issues for extended operating cycles

McHenry, Robert Sean

January 1997

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1997.Includes ...

Design, construction, and commissioning of an in-core materials testing facility for slow strain rate testing

O'Donnell, Jeffrey R. (Jeffrey Robert)

January 1994

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1994.Includes ...

An investigation of how powerful a nuclear reactor can be

Stoops, Tammy L. (Tammy Lynn)

January 1996

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1996.Includes bi...

Weld development for Incoloy alloy 908, a low thermal expansion superalloy

Jang, Chang Heui

January 1995

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1995.Includes ...

Heat Treatment Modelling of Large Nuclear Forgings

Howson, Michael

September 2018

The structural integrity and operational safety of nuclear pressure vessels is based upon mechanical...

Performance analysis of matrix fuel for a passive pressure tube light water reactor

Mattingly, Brett T. (Brett Thomas)

January 1995

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1995.Includes bi...

The mechanical behavior of maraging steel under extreme electromechanical and thermal conditions

Raboin, Peter J

January 1989

Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1989.Includ...

Evaluation of radiation induced segregation in Fe-Ni-Cr alloys

Flores, Carlos D. (Carlos Daniel)

January 1994

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering; and, (M.S.)--Mas...

The influence of cooling rate on the microstructure of stainless steel alloys

Elmer, John Walter

January 1988

Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, ...

Multi-modular nuclear reactor plant simulation and control

Waltrip, Mather Knight

January 1989

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1989, and Thesis...

A strategy for weapons-grade plutonium disposition

Sylvester, Kory William Budlong

January 1994

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1994.Includes bi...

Heat loss in MHTGR upper plenum

Min, Byung Kyu

January 1991

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1991.Includes...

In-pile loop studies of zinc addition to reduce corrosion and activity deposition in PWRS

Hsueh, Po-Wen

January 1995

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1995.Includes ...

Characterization of a high-current tandem accelerator and the associated development of a water-cooled beryllium target for the production of intense neutron beams

Blackburn, Brandon William

January 1997

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1997.Includes bi...

Stress corrosion crack detection in alloy 600 in high temperature caustic

Brisson, Bruce W. (Bruce William)

January 1996

Thesis (Nucl. E.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1996.Include...

Nuclear power plant surveillance issues for extended operating cycles

McHenry, Robert Sean

January 1997

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1997.Includes ...

Design, construction, and commissioning of an in-core materials testing facility for slow strain rate testing

O'Donnell, Jeffrey R. (Jeffrey Robert)

January 1994

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1994.Includes ...

An investigation of how powerful a nuclear reactor can be

Stoops, Tammy L. (Tammy Lynn)

January 1996

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1996.Includes bi...

Weld development for Incoloy alloy 908, a low thermal expansion superalloy

Jang, Chang Heui

January 1995

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1995.Includes ...

Heat Treatment Modelling of Large Nuclear Forgings

Howson, Michael

September 2018

The structural integrity and operational safety of nuclear pressure vessels is based upon mechanical...

Performance analysis of matrix fuel for a passive pressure tube light water reactor

Mattingly, Brett T. (Brett Thomas)

January 1995

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1995.Includes bi...

The mechanical behavior of maraging steel under extreme electromechanical and thermal conditions

Raboin, Peter J

January 1989

Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1989.Includ...

Evaluation of radiation induced segregation in Fe-Ni-Cr alloys

Flores, Carlos D. (Carlos Daniel)

January 1994

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering; and, (M.S.)--Mas...

The influence of cooling rate on the microstructure of stainless steel alloys

Elmer, John Walter

January 1988

Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, ...

Multi-modular nuclear reactor plant simulation and control

Waltrip, Mather Knight

January 1989

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1989, and Thesis...

A strategy for weapons-grade plutonium disposition

Sylvester, Kory William Budlong

January 1994

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1994.Includes bi...

Heat loss in MHTGR upper plenum

Min, Byung Kyu

January 1991

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1991.Includes...

In-pile loop studies of zinc addition to reduce corrosion and activity deposition in PWRS

Hsueh, Po-Wen

January 1995

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1995.Includes ...

Characterization of a high-current tandem accelerator and the associated development of a water-cooled beryllium target for the production of intense neutron beams

Blackburn, Brandon William

January 1997

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1997.Includes bi...

Stress corrosion crack detection in alloy 600 in high temperature caustic

Brisson, Bruce W. (Bruce William)

January 1996

Thesis (Nucl. E.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1996.Include...

Nuclear power plant surveillance issues for extended operating cycles

McHenry, Robert Sean

January 1997

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Nuclear Engineering, 1997.Includes ...

Overheating of low-allow forging steels for nuclear power plant rotors and vessels

Abstract

Extracted data

Overheating of low-allow forging steels for nuclear power plant rotors and vessels

Abstract

Extracted data

Related items

Related items