This paper presents initial results from electrical, spectroscopic and ion beam induced charge (IBIC) characterisation of a novel silicon PIN detector, featuring an on-chip n -channel JFET and matched feedback capacitor integrated on its p-side (frontside). This structure reduces electronic noise by minimising stray capacitance and enables highly efficient optical coupling between the detector back-side and scintillator, providing a fill factor of close to 100%. The detector is specifically designed for use in high resolution gamma cameras, where a pixellated scintillator crystal is directly coupled to an array of silicon photodetectors. The on-chip JFET is matched with the photodiode capacitance and forms the input stage of an external cha...
We describe our experience on design and fabrication, on high-resistivity silicon substrates, of mic...
The medical physics group of the Turin section of the National Institute of Nuclear Physics, on the ...
A new hybrid charge-sensitive preamplifier with a sensitivity of 5 mV/MeV has been specifically desi...
This paper presents initial results from electrical, spectroscopic and ion beam induced charge (IBIC...
This paper presents initial results from electrical, spectroscopic and ion beam induced charge (IBIC...
Future generations of solid-state high-energy gamma imaging cameras require pixellated semiconductor...
This paper presents the design and experimental results relevant to front-end circuits integrated on...
We report on the development of a radiation-detector compatible JFET technology on high-resistivity ...
We report on an improved fabrication technology allowing n-JFET/n-MOSFET charge sensitive amplifiers...
We report on the latest results obtained from the development of a fabrication technology for PIN ra...
International audienceAn 8-channel Front End integrated Electronics (FEE) circuit is designed and fa...
The 4D-MPET project aims to design a positron emission tomography detection module capable of workin...
A pin photodiode monolithically integrated with a bias resistor and a JFET-based source follower is ...
In the quest to develop high spatial resolution Positron Emission Tomography (PET), the goal of this...
The Move-IT research project of the National Institute for Nuclear Physics aims at the study of mode...
We describe our experience on design and fabrication, on high-resistivity silicon substrates, of mic...
The medical physics group of the Turin section of the National Institute of Nuclear Physics, on the ...
A new hybrid charge-sensitive preamplifier with a sensitivity of 5 mV/MeV has been specifically desi...
This paper presents initial results from electrical, spectroscopic and ion beam induced charge (IBIC...
This paper presents initial results from electrical, spectroscopic and ion beam induced charge (IBIC...
Future generations of solid-state high-energy gamma imaging cameras require pixellated semiconductor...
This paper presents the design and experimental results relevant to front-end circuits integrated on...
We report on the development of a radiation-detector compatible JFET technology on high-resistivity ...
We report on an improved fabrication technology allowing n-JFET/n-MOSFET charge sensitive amplifiers...
We report on the latest results obtained from the development of a fabrication technology for PIN ra...
International audienceAn 8-channel Front End integrated Electronics (FEE) circuit is designed and fa...
The 4D-MPET project aims to design a positron emission tomography detection module capable of workin...
A pin photodiode monolithically integrated with a bias resistor and a JFET-based source follower is ...
In the quest to develop high spatial resolution Positron Emission Tomography (PET), the goal of this...
The Move-IT research project of the National Institute for Nuclear Physics aims at the study of mode...
We describe our experience on design and fabrication, on high-resistivity silicon substrates, of mic...
The medical physics group of the Turin section of the National Institute of Nuclear Physics, on the ...
A new hybrid charge-sensitive preamplifier with a sensitivity of 5 mV/MeV has been specifically desi...