Add to ORKGElectrostatic beam-position monitor installed in its final location (bake-out cover removed). The ISR will contain about 110 of these monitors. Their accuracy is better than 1 mm, their band width about 1 MHz
An apparatus for determining the position of an x-ray beam relative to a desired beam axis where the...
The static beam position monitors for a small ion storage ring S-LSR are being developed now.The mon...
This pbar note is to describe a recent checkout of the AP3, AP2, AP1 and P2 (F11 to F17) Beam Positi...
International audienceBeam Position Monitors (BPM) measure the beam transverse position, the beam ph...
At iThemba LABS intense proton beams, accelerated in a K=200 MeV separated-sector cyclotron with a K...
We describe the beam position monitor system built for PEP-II, the B-factory at SLAC. The system rep...
Beam position monitors (BPM) for synchrotron light storage rings usually consist of beam pickup elec...
Electromagnetic beam monitors have been developed and used to measure the position of the center of ...
The low beta of proton or ion beams favors an electrostatic pickup to measure the transverse beam ce...
To monitor the position of the electron beam during transport from the Booster Synchrotron to the St...
The new LINAC4 will provide 160 MeV H- ion beams for charge-exchange and proton injection into the C...
The TRIUMF cyclotron provides a 500 MeV proton beam to the ISAC RIB facility. The development of tar...
The design of electromagnetic monitors for observation of beam charge and position of single bunches...
This model was used for calibration measurements (beam simulated by RF voltage on a wire, plus x-y d...
An IPM monitor to measure a detailed profile of the beam has been developed and constructed. The mon...
An apparatus for determining the position of an x-ray beam relative to a desired beam axis where the...
The static beam position monitors for a small ion storage ring S-LSR are being developed now.The mon...
This pbar note is to describe a recent checkout of the AP3, AP2, AP1 and P2 (F11 to F17) Beam Positi...
International audienceBeam Position Monitors (BPM) measure the beam transverse position, the beam ph...
At iThemba LABS intense proton beams, accelerated in a K=200 MeV separated-sector cyclotron with a K...
We describe the beam position monitor system built for PEP-II, the B-factory at SLAC. The system rep...
Beam position monitors (BPM) for synchrotron light storage rings usually consist of beam pickup elec...
Electromagnetic beam monitors have been developed and used to measure the position of the center of ...
The low beta of proton or ion beams favors an electrostatic pickup to measure the transverse beam ce...
To monitor the position of the electron beam during transport from the Booster Synchrotron to the St...
The new LINAC4 will provide 160 MeV H- ion beams for charge-exchange and proton injection into the C...
The TRIUMF cyclotron provides a 500 MeV proton beam to the ISAC RIB facility. The development of tar...
The design of electromagnetic monitors for observation of beam charge and position of single bunches...
This model was used for calibration measurements (beam simulated by RF voltage on a wire, plus x-y d...
An IPM monitor to measure a detailed profile of the beam has been developed and constructed. The mon...
An apparatus for determining the position of an x-ray beam relative to a desired beam axis where the...
The static beam position monitors for a small ion storage ring S-LSR are being developed now.The mon...
This pbar note is to describe a recent checkout of the AP3, AP2, AP1 and P2 (F11 to F17) Beam Positi...