Add to ORKGPolypropylene (PP) nanocomposites were prepared by melt intercalation in an intermeshing co-rotating twin-screw extruder. The effect of molecular weight of PP-MA (maleic anhydride modified polypropylene) on clay dispersion and mechanical properties of nanocomposites were investigated. After injection molding, the tensile properties and impact strength were measured. The best overall mechanical properties were found for composites containing PP-MA with the highest molecular weight.P(ED2.1.00/03.0111),
International audiencePolypropylene/organoclay nanocomposites have been prepared via direct melt int...
Polypropylene (PP)/montmorillonite (MMT) nanocomposites micro samples was produced by micro injecti...
International audienceThis study demonstrates how the specific mechanical energy (SME) can be used t...
Polypropylene (PP) nanocomposites were prepared by melt intercalation in an intermeshing co-rotating...
International audiencenylon 6/clay nanocomposites have been prepared in the Toyota laboratories [1],...
Polypropylene (PP)/clay nanocomposites prepared by melt blending using different clays and coupling ...
Clay containing polypropylene (PP) nanocomposites were prepared by direct melt mixing in a twin scre...
Polypropylene/clay nanocomposites were synthesized by melt compounding with Cloisite® 20A nanoclay a...
This work focuses on the influence of processing conditions on the nanocomposites structure, i.e. in...
International audienceThe preparation of polypropylene (PP)-organoclay based nanocomposites by melt ...
Polypropylene (PP)/poly(acrylonitrile-butadiene-styrene) (ABS) blends containing montmorillonite (MM...
As a preliminary starting point for the present study, physical and mechanical properties of polypro...
Polypropylene (PP)-based nanocomposites containing 4 wt% maleic anhydride grafted PP (PP-g-MA) and 2...
The development of polymer/clay nanocomposites faces the enormous challenge tooffer the consistent m...
Nanocomposites of polypropylene impact copolymer and organoclays were prepared using different compa...
International audiencePolypropylene/organoclay nanocomposites have been prepared via direct melt int...
Polypropylene (PP)/montmorillonite (MMT) nanocomposites micro samples was produced by micro injecti...
International audienceThis study demonstrates how the specific mechanical energy (SME) can be used t...
Polypropylene (PP) nanocomposites were prepared by melt intercalation in an intermeshing co-rotating...
International audiencenylon 6/clay nanocomposites have been prepared in the Toyota laboratories [1],...
Polypropylene (PP)/clay nanocomposites prepared by melt blending using different clays and coupling ...
Clay containing polypropylene (PP) nanocomposites were prepared by direct melt mixing in a twin scre...
Polypropylene/clay nanocomposites were synthesized by melt compounding with Cloisite® 20A nanoclay a...
This work focuses on the influence of processing conditions on the nanocomposites structure, i.e. in...
International audienceThe preparation of polypropylene (PP)-organoclay based nanocomposites by melt ...
Polypropylene (PP)/poly(acrylonitrile-butadiene-styrene) (ABS) blends containing montmorillonite (MM...
As a preliminary starting point for the present study, physical and mechanical properties of polypro...
Polypropylene (PP)-based nanocomposites containing 4 wt% maleic anhydride grafted PP (PP-g-MA) and 2...
The development of polymer/clay nanocomposites faces the enormous challenge tooffer the consistent m...
Nanocomposites of polypropylene impact copolymer and organoclays were prepared using different compa...
International audiencePolypropylene/organoclay nanocomposites have been prepared via direct melt int...
Polypropylene (PP)/montmorillonite (MMT) nanocomposites micro samples was produced by micro injecti...
International audienceThis study demonstrates how the specific mechanical energy (SME) can be used t...