In situ observations of the reaction between solid Cu in contact with molten Sn–0.7 wt.% Cu were achieved using a synchrotron X-ray imaging technique. It was found that, upon wetting, the rapid dissolution of Cu adjacent to the solid–liquid interface was followed by near-instantaneous interfacial intermetallic compound (IMC) formation. The kinetics of IMC formation were also elucidated. The results provide direct experimental evidence of the sequence of events in the dissolution reaction and subsequent diffusion, and in particular of the growth mechanisms of the IMC layer
This study investigated the fusion and phase-transformation processes of nano-intermetallic compound...
cie ed ine We investigate the early stages of the morphological evolution of intermetallic compounds...
[[abstract]]©2007 MRS - The Sn/Cu/Sn/Cu/Sn sandwich-type couples prepared by the casting method are ...
The formation and growth of Cu–Sn intermetallic film at the interface between molten Sn–Pb solders a...
The growth kinetics of an intermetallic compound (IMC) layer formed between Sn-3.5Ag-0.5Cu (SAC) sol...
The growth of Cu-Sn intermetallic compounds (IMCs) at the molten Pb-Sn solder/Cu interface was studi...
The development of microstructure during melting, reactive wetting and solidification of solder past...
This paper presents the use of the transient liquid phase concept to grow the high temperature CuSni...
International audienceInterfacial reaction between solid e-Cu3Sn compound and liquid Sn at 250 °C is...
The growth mechanisms of primary CuSn are studied in Sn-Cu alloys and solder joints by combining EBS...
The focus of this study is on the role of Cu content in the dissolution kinetics of Cu in high-Sn so...
Transient Liquid Phase (TPL) bounding of Sn foil sandwiched between two Cu foils involves, in the te...
The features of Cu6Sn5 growing slowly at lower temperature and growing up rapidly over 350??C, and/o...
[[abstract]]c2003 Springer - Specimens with the Sn/Cu/Sn/Ni/Sn/Cu/Sn structure reacted at 200°C are ...
In the microelectronics industry, many solder junctions rely upon reaction between a copper substrat...
This study investigated the fusion and phase-transformation processes of nano-intermetallic compound...
cie ed ine We investigate the early stages of the morphological evolution of intermetallic compounds...
[[abstract]]©2007 MRS - The Sn/Cu/Sn/Cu/Sn sandwich-type couples prepared by the casting method are ...
The formation and growth of Cu–Sn intermetallic film at the interface between molten Sn–Pb solders a...
The growth kinetics of an intermetallic compound (IMC) layer formed between Sn-3.5Ag-0.5Cu (SAC) sol...
The growth of Cu-Sn intermetallic compounds (IMCs) at the molten Pb-Sn solder/Cu interface was studi...
The development of microstructure during melting, reactive wetting and solidification of solder past...
This paper presents the use of the transient liquid phase concept to grow the high temperature CuSni...
International audienceInterfacial reaction between solid e-Cu3Sn compound and liquid Sn at 250 °C is...
The growth mechanisms of primary CuSn are studied in Sn-Cu alloys and solder joints by combining EBS...
The focus of this study is on the role of Cu content in the dissolution kinetics of Cu in high-Sn so...
Transient Liquid Phase (TPL) bounding of Sn foil sandwiched between two Cu foils involves, in the te...
The features of Cu6Sn5 growing slowly at lower temperature and growing up rapidly over 350??C, and/o...
[[abstract]]c2003 Springer - Specimens with the Sn/Cu/Sn/Ni/Sn/Cu/Sn structure reacted at 200°C are ...
In the microelectronics industry, many solder junctions rely upon reaction between a copper substrat...
This study investigated the fusion and phase-transformation processes of nano-intermetallic compound...
cie ed ine We investigate the early stages of the morphological evolution of intermetallic compounds...
[[abstract]]©2007 MRS - The Sn/Cu/Sn/Cu/Sn sandwich-type couples prepared by the casting method are ...