Autocatalytic/electroless quaternary NiCoWP coatings were prepared by using an alkaline based bath. Ternary NiCoP coatings were also prepared for the comparison. Coatings were characterized for their morphology, composition, phase transformation behavior, microhardness and corrosion resistance. Surface of the both deposits exhibited nodular structure but W incorporation in NiCoP matrix had resulted in a marginal increase in nodularity. Roughness (Ra) values measured using Optical profilometer indicated that quaternary deposits exhibited more roughness (0.08 μm) compared to ternary deposits. Compositional analysis carried out on ternary deposit showed the presence of Ni (37 wt.%), Co (53 wt.%) along with about 10 wt.% of P. Whereas W ( ≈ 3 w...
The utilization of Electroless Nickel-Phosphorus (EN) coatings has witnessed a staggering increase d...
The present study investigates optimisation of microhardness of electroless Ni–Co–P alloy coating ov...
This paper reports the effects of the coating parameters on the hardness of the coating with the app...
Autocatalytic/electroless quaternary NiCoWP coatings were prepared by using an alkaline based bath. ...
In the present investigation ternary electroless Ni-W-P alloy coatings were prepared using alkaline ...
Ternary Ni-W-P alloy deposits with and without additive were prepared by autocatalytic deposition. D...
Autocatalytic ternary Ni-Sn-P, Ni-W-P and quaternary Ni-W-Sn-P films were prepared using alkaline ci...
Coating on steel can improve various characteristics such as corrosion resistance in salt water, sur...
In the present investigation electroless ternary NiWP–Al2O3 composite coatings were prepared using a...
<div><p>Ternary Ni-W-P films were produced by electroless deposition using baths with different tung...
Two types of electroless Ni-W-P coatings: nanocrystalline with low P and amorphous with higher P con...
An attempt has been made to deposit ternary Ni-W-P coatings autocatalytically using nickel sulphamat...
The autocatalytic (electroless) deposition of Nix2013;P based alloys is a well-known commercial proc...
Heat treatment of nickel-based alloy can increase the alloy’s hardness as well as the wear resistanc...
The use of electroless deposition method to deposit nickel alloy attracts attention due to its unifo...
The utilization of Electroless Nickel-Phosphorus (EN) coatings has witnessed a staggering increase d...
The present study investigates optimisation of microhardness of electroless Ni–Co–P alloy coating ov...
This paper reports the effects of the coating parameters on the hardness of the coating with the app...
Autocatalytic/electroless quaternary NiCoWP coatings were prepared by using an alkaline based bath. ...
In the present investigation ternary electroless Ni-W-P alloy coatings were prepared using alkaline ...
Ternary Ni-W-P alloy deposits with and without additive were prepared by autocatalytic deposition. D...
Autocatalytic ternary Ni-Sn-P, Ni-W-P and quaternary Ni-W-Sn-P films were prepared using alkaline ci...
Coating on steel can improve various characteristics such as corrosion resistance in salt water, sur...
In the present investigation electroless ternary NiWP–Al2O3 composite coatings were prepared using a...
<div><p>Ternary Ni-W-P films were produced by electroless deposition using baths with different tung...
Two types of electroless Ni-W-P coatings: nanocrystalline with low P and amorphous with higher P con...
An attempt has been made to deposit ternary Ni-W-P coatings autocatalytically using nickel sulphamat...
The autocatalytic (electroless) deposition of Nix2013;P based alloys is a well-known commercial proc...
Heat treatment of nickel-based alloy can increase the alloy’s hardness as well as the wear resistanc...
The use of electroless deposition method to deposit nickel alloy attracts attention due to its unifo...
The utilization of Electroless Nickel-Phosphorus (EN) coatings has witnessed a staggering increase d...
The present study investigates optimisation of microhardness of electroless Ni–Co–P alloy coating ov...
This paper reports the effects of the coating parameters on the hardness of the coating with the app...