Raw and processed data: Properties of Titanium Zirconium Molybdenum Alloy after Exposure to Indium at Elevated Temperature
All data contained in the article titled "Characterization of hot deformation and microstructure evo...
Titanium-based alloys are constantly improved to obtain properties suitable for their use. Improving...
On a strength-to-weight ratio basis, ceramals appeared promising as gas-turbine-blade materials in t...
Title: Effect of molybdenum content on phase transformations in binary Ti-Mo alloys Author: Veronika...
The corrosion rates of low-titanium zirconium alloys increased with titanmum content when exposed to...
New titanium alloys for biomedical applications have been developed primarily with the addition of N...
Titanium is recognized for its strategic importance as a unique lightweight, high strength alloyed s...
Zirconium alloys are routinely used as cladding material in the nuclear industry due to the favorabl...
Zirconium alpha-beta alloys were found to respond to solution and aging heat treatmeats very similar...
In this study, Ti-30Mo-nTiC (0, 0.5 wt.%) and Ti-30Mo-0.5TiC-xZr (0, 4, 8, 12 wt.%) alloys were prep...
Hot-deep drawing is an innovative processing technology to produce complex shaped sheet metal compon...
To guarantee the requirements for modern technology it is necessary to create new alloys with enhanc...
In the first section of this report, a study was made of the high- temperature properties of a Mo-3%...
Titanium alloys are widely used in aerospace applications due to their good ratio of weight versus m...
The mechanical properties of near β Ti-alloys are highly dependent on their microstructures, which o...
All data contained in the article titled "Characterization of hot deformation and microstructure evo...
Titanium-based alloys are constantly improved to obtain properties suitable for their use. Improving...
On a strength-to-weight ratio basis, ceramals appeared promising as gas-turbine-blade materials in t...
Title: Effect of molybdenum content on phase transformations in binary Ti-Mo alloys Author: Veronika...
The corrosion rates of low-titanium zirconium alloys increased with titanmum content when exposed to...
New titanium alloys for biomedical applications have been developed primarily with the addition of N...
Titanium is recognized for its strategic importance as a unique lightweight, high strength alloyed s...
Zirconium alloys are routinely used as cladding material in the nuclear industry due to the favorabl...
Zirconium alpha-beta alloys were found to respond to solution and aging heat treatmeats very similar...
In this study, Ti-30Mo-nTiC (0, 0.5 wt.%) and Ti-30Mo-0.5TiC-xZr (0, 4, 8, 12 wt.%) alloys were prep...
Hot-deep drawing is an innovative processing technology to produce complex shaped sheet metal compon...
To guarantee the requirements for modern technology it is necessary to create new alloys with enhanc...
In the first section of this report, a study was made of the high- temperature properties of a Mo-3%...
Titanium alloys are widely used in aerospace applications due to their good ratio of weight versus m...
The mechanical properties of near β Ti-alloys are highly dependent on their microstructures, which o...
All data contained in the article titled "Characterization of hot deformation and microstructure evo...
Titanium-based alloys are constantly improved to obtain properties suitable for their use. Improving...
On a strength-to-weight ratio basis, ceramals appeared promising as gas-turbine-blade materials in t...
DOI
Add to ORKG