This report presents the history of a preflight contamination problem that occurred in the ATM C and D panel/EREP cooling system on the Skylab, the studies that were made to determine the cause of the problem, and corrective actions that were made prior to lift-off. The results of all the observations, analyses and laboratory testing indicated that the contamination came from one or more of the EREP tape recorder coldplates and was caused by some abnormal electrolytic action, either during bench testing or in the spacecraft. Studies indicate that no such electrolytic action is likely to occur under normal operating conditions
Flight experiments flown on the Space Shuttle, the International Space Station, Mir, Skylab, and fre...
Tests were conducted to determine the present sensitometric characteristics of the SL/1 EREP films s...
Effective contamination control as applied to manned space flight environments is a discipline chara...
Six quartz crystal microbalance contamination monitors were flown on Skylab to monitor the depositio...
Skylab Earth Resources Experiment Package (EREP) experiments, S191 and S192, required a cold tempera...
During EVA (Extravehicular Activity) 23 aboard the ISS (International Space Station) on 07/16/2013 a...
The second, third, and fourth space transportation system missions are described including the locat...
During EVA (Extravehicular Activity) 23 aboard the ISS (International Space Station) on 07/16/2013 a...
The STS-9/Induced Environment Contamination Monitor (IECM) mission is briefly described. Preliminary...
During this reporting period, the phase 1 interim report was written and submitted. Detailed compute...
During pre-servicing of a space shuttle (orbiter vehicle, OV-102), helium leak detection of an avion...
The main purpose of this investigation was for NASA to help the National Transportation Safety Board...
Many contamination sources have been identified on the Long Duration Exposure Facility (LDEF). Effec...
Contamination inside Space Station modules was studied to determine the best methods of controlling ...
In order to test their reactivity with Atomic Oxygen, twenty five materials were flown on the EOIM-3...
Flight experiments flown on the Space Shuttle, the International Space Station, Mir, Skylab, and fre...
Tests were conducted to determine the present sensitometric characteristics of the SL/1 EREP films s...
Effective contamination control as applied to manned space flight environments is a discipline chara...
Six quartz crystal microbalance contamination monitors were flown on Skylab to monitor the depositio...
Skylab Earth Resources Experiment Package (EREP) experiments, S191 and S192, required a cold tempera...
During EVA (Extravehicular Activity) 23 aboard the ISS (International Space Station) on 07/16/2013 a...
The second, third, and fourth space transportation system missions are described including the locat...
During EVA (Extravehicular Activity) 23 aboard the ISS (International Space Station) on 07/16/2013 a...
The STS-9/Induced Environment Contamination Monitor (IECM) mission is briefly described. Preliminary...
During this reporting period, the phase 1 interim report was written and submitted. Detailed compute...
During pre-servicing of a space shuttle (orbiter vehicle, OV-102), helium leak detection of an avion...
The main purpose of this investigation was for NASA to help the National Transportation Safety Board...
Many contamination sources have been identified on the Long Duration Exposure Facility (LDEF). Effec...
Contamination inside Space Station modules was studied to determine the best methods of controlling ...
In order to test their reactivity with Atomic Oxygen, twenty five materials were flown on the EOIM-3...
Flight experiments flown on the Space Shuttle, the International Space Station, Mir, Skylab, and fre...
Tests were conducted to determine the present sensitometric characteristics of the SL/1 EREP films s...
Effective contamination control as applied to manned space flight environments is a discipline chara...