A lumped model to represent the photodielectric effect is developed. An analog simulation for a sample in a microwave cavity with a static magnetic field is developed. A system to measure continuously the PDE is analyzed. A performance factor to compared PD detectors versus ac photoconductors is computed. The operating conditions are defined for the appropriate noise conditions. The detectivity of the detector is found to be limited by the semiconductor sample noise
This article proposes a photothermal model to reveal the thermo-magneto-mechanical properties of sem...
The optical and electrical characteristics of the various types of photodiodes potentially useful fo...
The III-V compound semiconductor materials are used in a wide variety of electronic, optoelectronic...
Some physical theories pertinent to the measurement properties of gallium arsenide are presented and...
Empirical thesis.Bibliography: page 103.1. Introduction -- 2. Background -- 3. Semiconductor materia...
Using photodielectric effect to detect densities of free and trapped carriers in II-VI compounds at ...
We present a preliminary study to develop a large area photodetector, based on a semiconductor cryst...
Title: Photo-Hall effect spectroscopy and laser-induced transient currents in CdTe-based semiconduct...
Degradation of electrical and optical characteristics of photodetectors in increased temperature con...
© 2016 IOP Publishing Ltd Printed in the UK.An enhanced contactless microwave technique allows us to...
Cadmium sulfide photodielectric effect at cryogenic temperatures with bibliograph
Continuous-wave lasers locked to high-finesse optical reference cavities are oscillators that produc...
Photoconductivity is the incremental change in the electrical conductivity of a semiconductor or ins...
Available solid state photomultiplier (SSPM) detectors were tested under low-background, low tempera...
Photothermal deflection spectroscopy (PDS) was used to measure the bandgap optical parameters and t...
This article proposes a photothermal model to reveal the thermo-magneto-mechanical properties of sem...
The optical and electrical characteristics of the various types of photodiodes potentially useful fo...
The III-V compound semiconductor materials are used in a wide variety of electronic, optoelectronic...
Some physical theories pertinent to the measurement properties of gallium arsenide are presented and...
Empirical thesis.Bibliography: page 103.1. Introduction -- 2. Background -- 3. Semiconductor materia...
Using photodielectric effect to detect densities of free and trapped carriers in II-VI compounds at ...
We present a preliminary study to develop a large area photodetector, based on a semiconductor cryst...
Title: Photo-Hall effect spectroscopy and laser-induced transient currents in CdTe-based semiconduct...
Degradation of electrical and optical characteristics of photodetectors in increased temperature con...
© 2016 IOP Publishing Ltd Printed in the UK.An enhanced contactless microwave technique allows us to...
Cadmium sulfide photodielectric effect at cryogenic temperatures with bibliograph
Continuous-wave lasers locked to high-finesse optical reference cavities are oscillators that produc...
Photoconductivity is the incremental change in the electrical conductivity of a semiconductor or ins...
Available solid state photomultiplier (SSPM) detectors were tested under low-background, low tempera...
Photothermal deflection spectroscopy (PDS) was used to measure the bandgap optical parameters and t...
This article proposes a photothermal model to reveal the thermo-magneto-mechanical properties of sem...
The optical and electrical characteristics of the various types of photodiodes potentially useful fo...
The III-V compound semiconductor materials are used in a wide variety of electronic, optoelectronic...