Tests were conducted to determine the present sensitometric characteristics of the SL/1 EREP films stored in Skylab. These films underwent the high temperature environment at the beginning of the mission and have since been stored outside the film vault. As a result, the films will have received a radiation dose estimated at approximately 12 rads by the end of SL/3
The sensitometry and film calibration effort for the Skylab/ATM S-056 X-ray telescope is summarized....
In a simulation conducted August 28, 1972, two rolls of Type SO-212 film were rewound in the sensito...
Radiation protection for photographic film and reduction of radiation produced background fo
Radiation tests were conducted on the various types of Skylab film to establish the total radiation ...
Investigations were performed to determine optimum exposure and processing procedures necessary to p...
The results of a study of space radiation hazards to Project Skylab photographic film are presented....
The results of tests on processing the overexposed film on Skylab 4 are reported. The results of tes...
The effects of the Skylab environments on the 22 types of film used for data recording on Skylab wer...
The Skylab D024 Thermal Control Coatings and Polymeric Films Experiment was designed to determine th...
Since the United States of America is moving into an age of reusable space vehicles, both electronic...
Results of experimental work to evaluate the degradation rate of a parasol that was used as a means ...
Candidate Space Station Freedom radiator coatings including Z-93, YB-71, anodized aluminum and SiO(x...
Two types of film were flown on STS-40 space shuttle mission in June 1991. The IIaO special purpose ...
Sensitometric data obtained from all rolls of Skylab 1 original film containing sensitometric exposu...
Eastman Kodak Company included twelve substrate and coating samples on the Long Duration Exposure Fa...
The sensitometry and film calibration effort for the Skylab/ATM S-056 X-ray telescope is summarized....
In a simulation conducted August 28, 1972, two rolls of Type SO-212 film were rewound in the sensito...
Radiation protection for photographic film and reduction of radiation produced background fo
Radiation tests were conducted on the various types of Skylab film to establish the total radiation ...
Investigations were performed to determine optimum exposure and processing procedures necessary to p...
The results of a study of space radiation hazards to Project Skylab photographic film are presented....
The results of tests on processing the overexposed film on Skylab 4 are reported. The results of tes...
The effects of the Skylab environments on the 22 types of film used for data recording on Skylab wer...
The Skylab D024 Thermal Control Coatings and Polymeric Films Experiment was designed to determine th...
Since the United States of America is moving into an age of reusable space vehicles, both electronic...
Results of experimental work to evaluate the degradation rate of a parasol that was used as a means ...
Candidate Space Station Freedom radiator coatings including Z-93, YB-71, anodized aluminum and SiO(x...
Two types of film were flown on STS-40 space shuttle mission in June 1991. The IIaO special purpose ...
Sensitometric data obtained from all rolls of Skylab 1 original film containing sensitometric exposu...
Eastman Kodak Company included twelve substrate and coating samples on the Long Duration Exposure Fa...
The sensitometry and film calibration effort for the Skylab/ATM S-056 X-ray telescope is summarized....
In a simulation conducted August 28, 1972, two rolls of Type SO-212 film were rewound in the sensito...
Radiation protection for photographic film and reduction of radiation produced background fo